FTLX1472M3BNL Datasheet, PDF (1/11 Pages) Finisar Corporation. – 10Gb/s Multi-Rate, 10km Single Mode SFP+ Transceiver

Product Specification
10Gb/s Multi-Rate, 10km Single Mode SFP+ Transceiver
FTLX1472M3BNL
PRODUCT FEATURES
 Hot-pluggable SFP+ footprint
 Up to 10km link length
 6.14, 8.5 & 9.83 through 11.3 Gb/s
 -5 to 85 °C extended temp. range
 < 1.5W power dissipation,
< 1.0W with CDR’s OFF
 Pb-free / RoHS compliant
APPLICATIONS
 Single 3.3V power supply
 Un-cooled 1310nm DFB laser
 10G NRZ SONET VSR2000-2R1,
SDH I-64.1, OTN P1I1-2D1
 Limiting electrical interface
receiver
 Duplex LC connector
 Built-in digital diagnostic functions
 10GBASE-LR/-LW
 8.5G and 10G Fibre Channel
 6.144 and 9.83 Gb/s CPRI
 G.709 OTU 1e/2/2e FEC bit rates
Finisar’s FTLX1472M3BNL 10Gb/s Enhanced Small Form Factor Pluggable SFP+
transceivers are designed for use in links up to 10km over G.652 single mode fiber, and
they are equipped with internal transmitter and receiver retimer units (Clock and Data
Recover, or CDR) to comply to SONET/SDH jitter requirements and to enhance host
cards’ high speed data-signal integrity.
Finisar’s FTLX1472M3BNL transceivers are compliant with SFF-8431¹, SFF-8432²,
ITU-T G.693 VSR2000-2R1, SDH I-64.1³, OTN P1I1-2D1, IEEE 802.3ae 10GBASE-
LR/LW⁴, 8.5G and 10G Fiber Channel (1200-SM-LL-L⁵). They also support CPRI bit
rates 6.144Gb/s (with CDR’s OFF) and 9.83Gb/s with CDR’s ON or OFF.
Digital diagnostics functions are available via a 2-wire serial interface, as specified in
SFF-8472⁶. The transceivers are Pb-free and RoHS-6^7,8.
PRODUCT SELECTION
FTLX1472M3BNL
 Finisar Corporation - January 2013
Rev. B1
Page 1