FTLX1472M3BCL Datasheet, PDF (1/11 Pages) Finisar Corporation. – 10Gb/s, 2/10km Single Mode, Multi-Rate SFP+ Transceiver

Product Specification
10Gb/s, 2/10km Single Mode, Multi-Rate SFP+ Transceiver
FTLX1472M3BCL
PRODUCT FEATURES
• Hot-pluggable SFP+ footprint
• Supports 8.5Gb/s and from 9.95 to
11.3Gb/s bit rates
• Power dissipation < 1.5W
• RoHS-6 compliant (lead-free)
• Commercial temperature range
-5°C to 75°C
• Single 3.3V power supply
• Maximum link length of 10km
• Un-cooled 1310nm DFB laser
• Receiver limiting electrical
interface
• Duplex LC connector
• Built-in digital diagnostic functions
APPLICATIONS
• 10G NRZ SONET VSR2000-2R1,
SDH I-64.1, OTN P1I1-2D1
• 10G Ethernet 10GBASE-LR/-LW
• 10G Fibre Channel 1200-SM-LL-L
• G.709 OTU 1e/2/2e FEC bit rates
• 8.5Gb/s Fibre Channel
Finisar’s FTLX1472M3BCL 10Gb/s Enhanced Small Form Factor Pluggable SFP+
transceivers are designed for use in 10-Gigabit, multi-rate links up to a maximum 10km
over G.652 single mode fiber. They are compliant with SFF-8431¹, SFF-8432² , ITU-T
G.693 VSR2000-2R1, SDH I-64.1³ and OTN P1I1-2D1 (up to 2km), IEEE 802.3ae
10GBASE-LR/LW⁴ and 10G Fiber Channel 1200-SM-LL-L⁵ (up to 10km).
Digital diagnostics functions are available via a 2-wire serial interface, as specified in
SFF-8472⁶.
The FTLX1472M3BCL transceivers utilize internal clock and data recovery (CDR) units
on the transmitter and the receiver chains for SONET/SDH jitter compliance and to
enhance the signal integrity on XFP XFI-like host card designs. The transceiver is RoHS
compliant and lead free per Directive 2002/95/EC⁷, and Finisar Application Note AN-
2038⁸.
PRODUCT SELECTION
FTLX1472M3BCL
© Finisar Corporation - February 2012
Rev. B
Page 1