FTLX1471D3BCL Datasheet, PDF (1/11 Pages) Finisar Corporation. – RoHS-6 Compliant 10Gb/s 10km Single Mode Datacom SFP+ Transceiver

Product Specification
RoHS-6 Compliant
10Gb/s 10km Single Mode Datacom SFP+ Transceiver
FTLX1471D3BCL
PRODUCT FEATURES
• Hot-pluggable SFP+ footprint
• Supports 9.95 to 10.3Gb/s bit rates
• Power dissipation < 1W
• RoHS-6 compliant (lead-free)
• Commercial temperature range
-5°C to 70°C
• Single 3.3V power supply
• Maximum link length of 10km
• Uncooled 1310nm DFB laser
• Receiver limiting electrical
interface
• Duplex LC connector
• Built-in digital diagnostic functions
APPLICATIONS
• 10GBASE-LR/LW 10G Ethernet
Finisar’s FTLX1471D3BCL 10Gb/s Enhanced Small Form Factor Pluggable SFP+
transceivers are designed for use in 10-Gigabit Ethernet links up to 10km over Single
Mode fiber. They are compliant with SFF-8431¹, SFF-8432² and IEEE 802.3ae
10GBASE-LR/LW³. Digital diagnostics functions are available via a 2-wire serial
interface, as specified in SFF-8472⁴. The FTLX1471D3BCL is a “limiting module”, i.e.,
it employs a limiting receiver. Host board designers using an EDC PHY IC should
follow the IC manufacturer’s recommended settings for interoperating the host-board
EDC PHY with a limiting receiver SFP+ module. The transceiver is RoHS compliant and
lead free per Directive 2002/95/EC⁵, and Finisar Application Note AN-2038⁶.
PRODUCT SELECTION
FTLX1471D3BCL
© Finisar Corporation - May 2008
Rev. B
Page 1