FTLX1371D3BCL Datasheet, PDF (1/15 Pages) Finisar Corporation. – RoHS-6 Compliant 10Gb/s 220m Multi Mode Datacom SFP+ Transceiver

PRELIMINARY Product Specification
RoHS-6 Compliant
10Gb/s 220m Multi Mode Datacom SFP+ Transceiver
FTLX1371D3BCL
PRODUCT FEATURES
• Hot-pluggable SFP+ footprint
• Supports 9.95 to 10.3Gb/s bit rates
• Power dissipation < 1W
• RoHS-6 compliant (lead-free)
• Commercial temperature range
-5°C to 70°C
• Single 3.3V power supply
• Maximum link length of upto
220m
• Uncooled directly modulated
Fabry-Perot (FP) laser at 1310 nm
• Receiver linear electrical interface
• Duplex LC connector
• Built-in digital diagnostic functions
APPLICATIONS
• 10GBASE-LRM 10G Ethernet
• Legacy FDDI multimode links
Finisar’s FTLX1371D3BCL 10Gb/s Enhanced Small Form Factor Pluggable SFP+
transceivers are designed for use in 10-Gigabit Ethernet links up to 220m over Multi
Mode fiber. They are compliant with SFF-8431¹, SFF-8432² and IEEE 802.3 aq³
10GBASE-LRM. Digital diagnostics functions are available via a 2-wire serial interface,
as specified in SFF-8472⁴. The FTLX1371D3BCL is a “linear module” i.e. it employs a
linear receiver. Host board designers using an EDC PHY IC should follow the IC
manufacturer’s recommended settings for interoperating the host board EDC PHY with a
linear receiver SFP+ module. The transceiver is RoHS compliant and lead-free per
Directive 2002/95/EC⁵, and Finisar Application Note AN-2038⁶.
PRODUCT SELECTION
FTLX1371D3BCL
© Finisar Corporation - April 28, 2008 DRAFT Rev. A3
Page 1