FTLQ1381N7NL Datasheet, PDF (1/13 Pages) Finisar Corporation. – 40G NRZ VSR Multi-Rate CFP Optical Transceiver Module

Product Specification
40G NRZ VSR Multi-Rate CFP Optical Transceiver Module
FTLQ1381N7NL
PRODUCT FEATURES
 Hot-pluggable CFP form factor
 Supports 39.8 Gb/s to 44.6 Gb/s
data rates
 Power dissipation < 8W (class 1)
 RoHS-6 compliant (lead-free)
 Commercial temperature range
0°C to 70°C
 Single 3.3V power supply
 Maximum link length of 2km on
Single Mode Fiber (SMF)
 4x10G MLD electrical interface
 Duplex fiber receptacles
 Built-in digital diagnostic functions
SUPPORTED STANDARDS
 SONET OC-768/ SDH STM-256
 40GBASE-FR (40G Ethernet)
 OTN (OTU3 short reach)
 OTU3e1 and OTU3e2
Finisar’s FTLQ1381N7NL 40G CFP transceiver modules are designed for use in 40
Gigabit links required for router to router client side applications or uplink
interconnections to transport networks. Designed to enable optical compatibility with
existing carrier client interfaces VSR2000-3R2 per ITU-T G.693, they are compliant with
the CFP MSA¹, IEEE 802.3bg 40GBASE-FR² and OTU3 requirements specified in ITU-
T G.709. Digital diagnostics functions are available via an MDIO interface, as specified
by the CFP MSA. The optical transceiver is compliant per the RoHS Directive
2011/65/EU³. See Finisar Application Note AN-2038 for more details⁴.
PRODUCT SELECTION
FTLQ1381x7yz
x: E: Ethernet only (41.25Gb/s)
N: Multi-rate support up to 43.1Gb/s (default)
M: Multi-rate support up to 44.6Gb/s
7: 1550nm NRZ optical
y: N: Flat top (default configuration per MSA)
z: L: LC straight receptacle (default configuration)
A: LC 45 degree angled receptacle
S: SC straight receptacle
 Finisar Corporation – October 2015
Rev. B1
Page 1