FTLC1151SDPL Datasheet, PDF (1/8 Pages) Finisar Corporation. – 10km Multi-rate 100G QSFP28 Optical Transceiver Module

Product Specification
10km Multi-rate 100G QSFP28 Optical Transceiver Module
FTLC1151SDPL
PRODUCT FEATURES
 Hot-pluggable QSFP28 form factor
 Supports 103.1Gb/s and 112Gb/s
aggregate bit rates
 Power dissipation < 3.5W
 RoHS-6 compliant
 Commercial case temperature range
of 0°C to 70°C
 Single 3.3V power supply
 Maximum link length of 10km on
Single Mode Fiber (SMF)
 4x28Gb/s DFB-based
LAN-WDM transmitter
APPLICATIONS
 OTN OTU4 4I1-9D1F
 4x28G retimed electrical interface  100GBASE-LR4 100G Ethernet
 Duplex LC receptacles
 I2C management interface
Finisar’s FTLC1151SDPL QSFP28 transceiver modules are designed for use in 100
Gigabit Ethernet and 4x28G OTN client interfaces over single mode fiber. They are
compliant with the QSFP28 MSA¹, IEEE 802.3ba 100GBASE-LR4² and OTU4 4I1-
9D1F requirements specified in ITU-T Recommendations G.959.1/G.709 and
Supplement 39 (G.sup39). Digital diagnostics functions are available via the I2C
interface, as specified by the QSFP28 MSA and Finisar Application Note AN-2152⁵. The
transceiver is RoHS-6 compliant per Directive 2011/65/EC⁴ and Finisar Application Note
AN-2038⁵.
PRODUCT SELECTION
FTLC1151SDPL
S: OTU4 maximum bit rate (112 Gb/s)
D: 4x28G LAN-WDM optical architecture
P: Pull-tab release
L: LC straight receptacles
 Finisar Corporation –7-May-2016 Rev. B1
Page 1