FINF050-100CLA1 Datasheet, PDF (1/2 Pages) Finisar Corporation. – 50GHz Interleaver

Finisar
Features:
● Wide passband and
low dispersion
● Passively athermalized
● High isolation and
low insertion loss
● Fully qualified to
Telcordia 1209/1221
● Compact size
● RoHS compliance
50GHz Interleaver
The Finisar 50G Interleaver efficiently demultiplexes (or multiplexes) 50G
spaced channels into two sets of 100G spaced channels, which is the best
solution to upgrade the existing 100G spacing system and cost saving to
the equipment manufacturer. This passively athermalized interleaver offers
exceptional performance in an ultra-compact form factor.
Specifications:
Parameter
Wavelength range
Channel spacing
0.5 dB Passband relative to ITU grid¹
1 dB Passband relative to ITU grid¹
3 dB Passband relative to ITU grid¹
25dB Stopband relative to ITU grid¹
IL over passband^1,2
IL uniformity within port¹
IL uniformity all ports¹
IL ripple over passband¹
Isolation over stopband¹
Polarization dependent loss* (PDL)
Polarization mode dispersion (PMD)
Dispersion over passband
Return loss
Directivity
Optical power handling
Connector type
Pigtail length
Operating temperature range
Dimensions (L x W x H)
Note#1: Over all operating temperatures
Note#2: Connector loss included
Unit
nm
nm
GHz
GHz
GHz
GHz
dB
dB
dB
dB
dB
dB
ps
ps/nm
dB
dB
mW
-
m
o_C
mm
Minimum
1530.33
1570.41
Typical
C band
L band
50GHz
Maximum
1562.23
1603.17
± 10
± 11
± 15
± 10
2.0
0.5
0.8
0.5
25
0.5
0.3
-30
+30
40
50
500
SC/PC or LC/PC, others upon request
1.0±0.1, others upon request
-5
+70
113.5 x 18 x 14 or 120 x 90 x 16
Finisar Shanghai Inc.
No. 66 Huiqing Rd., East Zhangjiang Hi-Tech Park, Shanghai,
China 201201
Main: [phone] Fax: [phone]
Website: www.finisar.com
Finisar Corporation
1308 Moffett Park Drive, Sunnyvale, CA 94089-1133, USA
Main: [phone] Fax: [phone]
Email: [e-mail] Website: www.finisar.com
Jan. 09 Rev. E