FCBG110SD1CXX Datasheet, PDF (1/9 Pages) Finisar Corporation. – RoHS-6 Compliant 10Gb/s SFPwire SFP+ Active Optical Cable

Product Specification
RoHS-6 Compliant
10Gb/s SFPwire^(R) SFP+ Active Optical Cable
FCBG110SD1Cxx
PRODUCT FEATURES
• Hot-pluggable SFP+ cable ends
• Supports 10.3125 Gb/s bit rate
• RoHS-6 compliant (lead-free)
• Available in lengths up to 20m
• SFI Limiting interface
• Single 3.3V power supply
• Low power dissipation
• Commercial temperature range:
0°C to 70°C
• Rigid pull-tab for improved high-
density installations
APPLICATIONS
• 10G Ethernet Data Center Intra-Rack
and Inter-Rack links
Finisar’s FCBG110SD1Cxx 10Gb/s SFPwire® SFP+ active optical cables are designed
for use in 10-Gigabit Ethernet links. They are electrically compliant with SFF-8431¹, and
the mechanical SFP+ plug is compatible with SFF-8432². SFPwire is SFI limiting. No
host electrical transmitter pre-emphasis is required. No host electrical receiver linear
equalization is required. Host board designers using an EDC PHY IC should follow the
IC manufacturer’s recommended settings for interoperating the host-board EDC PHY
with a limiting receiver. SFPwire is compliant per the RoHS Directive 2011/65/EU. See
Finisar Application Note AN-2038 for more details.
PRODUCT SELECTION^*
FCBG110SD1C01
FCBG110SD1CA5
FCBG110SD1C02
FCBG110SD1CB5
FCBG110SD1C03
FCBG110SD1CC5
1-meter cable
1.5-meter cable
2-meter cable
2.5-meter cable
3-meter cable
3.5-meter cable
FCBG110SD1C05
FCBG110SD1C07
FCBG110SD1C10
FCBG110SD1C15
FCBG110SD1C20
5-meter cable
7-meter cable
10-meter cable
15-meter cable
20-meter cable
*_{Adding the letter “B” to the end of the part number specifies bulk packaging/shipping option.}
 Finisar Corporation - July 2015
Rev. C1
Page 1