BPRV2125A Datasheet, PDF (1/5 Pages) Finisar Corporation. – 43 Gb/s Balanced Photoreceiver

Product Specification
43 Gb/s Balanced Photoreceiver
BPRV2125(A)
PRODUCT FEATURES
 Balanced receiver for DPSK
 Dual optical input – Differential RF output
 DC- or AC coupled
 Threshold control option
 Hermetically sealed SMD package
APPLICATIONS
 43 Gb/s communication systems
 Transponder and line card designs
The balanced receiver module BPRV2125(A) is a differential front-end for 43 Gbit/s DPSK-
applications featuring high differential gain of typically 2800 V/W and is available as AC- or DC-
coupled variant. The photoreceiver contains two waveguide-integrated pin-photodiodes (PD) on a
single chip and a limiting amplifier (LA) within one small form factor SMD-package. The limiting
amplifier provides a differential output voltage swing of typ. 600 mV. The receiver is well suited for
DPSK and DQPSK applications at 40G and 100G with rates between 20 and 43 GBaud.
ORDERING INFORMATION
BPRV2125(A)-GM-zz
LP
zz
= LP (LC/PC) standard optical connector
= FA (FC/APC)
GM
= male GPPO™ connector
A
= AC coupled version
= blank (DC coupled version)
For evaluation kit please use the following code: EVA – BPRV
Proprietary © 2015 Finisar Corporation. All rights reserved
Rev. A3
Page 1