LMA417 Datasheet, PDF (3/4 Pages) Filtronic Compound Semiconductors – MEDIUM POWER PHEMT MMIC

• ASSEMBLY DRAWING
LMA417
MEDIUM POWER PHEMT MMIC
Notes:
•
•
•
•
Recommended lead bond technique is thermocompression wedge bonding with 0.001” (25µm) diameter wire. The
bond tool force shall be 35-38 gram. Bonding stage temperature shall be 230-240°C, heated tool (150-160°C) is
recommended. Ultrasonic bonding is not recommended.
The recommended die attach is a eutectic 80/20 Gold/Tin solder, using a stage temperature of 285-290°C.
Bond on bond or stitch bond acceptable.
Conductor over conductor acceptable. Conductors must not short.
Phone: [phone]
Fax: [phone]
http:// www.filss.com
Revised: 03/23/01
Email: [e-mail]