FMA3058 Datasheet, PDF (1/6 Pages) Filtronic Compound Semiconductors – 2-20 GHZ BROADBAND MMIC AMPLIFIER

2-20 GHZ BROADBAND MMIC AMPLIFIER
FMA3058
Pilot Datasheet v2.5
FEATURES:
• 15dB Gain
• Low Noise Amplifier
• Single Supply (Self Biased +5V @ 90mA)
• 12 dBm P_1dB Output Power at 20GHz
• pHEMT Technology
• Bias Control
• Input Return Loss < -12 dB
• Output Return Loss < -10 dB
GENERAL DESCRIPTION:
The FMA3058 is a high performance 2-20GHz
Gallium Arsenide monolithic travelling wave
amplifier. It is suitable for use in broadband
communication, instrumentation and electronic
warfare applications. The die is fabricated
using the Filtronic 0.25µm process. The Circuit
is DC blocked at both the RF input and the RF
output.
FUNCTIONAL SCHEMATIC:
VDD
RF Input
RF Output
TYPICAL APPLICATIONS:
• Test Instrumentation
• Electronic Warfare
• Broadband Communication Infrastructure
• Fiber Optics
ELECTRICAL SPECIFICATIONS (SMALL-SIGNAL UNLESS OTHERWISE STATED):
PARAMETER
Small Signal Gain
Gain Flatness
Input Return Loss
Output Return Loss
CONDITIONS
2-20 GHz
2-20 GHz
2-20 GHz
2-20 GHz
Output Power at 1dB
compression point
Drain Current
Noise Figure
2 GHz, 5V drain bias
10 GHz, 5V drain bias
20 GHz, 5V drain bias
5V drain bias
2 GHz, 5V drain bias
10 GHz, 5V drain bias
20 GHz, 5V drain bias
Note: T_AMBIENT = +25°C, Z₀ = 50Ω Pads B and C open circuit
DIFFERENT BIAS CONFIGURATIONS:
MIN
–
–
–
–
–
–
–
–
–
–
–
TYP
15
–
-12
-10
18
18
15
90
3.5
3
6.5
MAX
–
3
–
–
UNITS
dB
dB
dB
dB
–
dBm
–
dBm
–
dBm
–
mA
–
dB
–
dB
–
dB
The device has a default current, set by an on chip resistor. Pads B and C can be bonded to
ground to increase the device current by reducing the default resistance.
Tel: [phone]
1
Specifications subject to change without notice
Filtronic Compound Semiconductors Ltd
Fax: [phone]
Email: [e-mail]
Website: www.filtronic.com