FMA3016-QFN Datasheet, PDF (1/6 Pages) Filtronic Compound Semiconductors – 3.5GHz High Power Amplifier for WiMAX applications

FMA3016-QFN
3.5GHz High Power Amplifier for WiMAX applications ^{Preliminary Datasheet v3.1}
FEATURES:
• 3.5GHz WiMAX power amplifier
• 17dB gain
• 2.5% EVM with 30dBm transmit power
• 10% PAE with 30dBm transmit power
• 10W P_sat
• 20 lead air-cavity QFN with Cu lead
frame
FMA3016-QFN EVALUATION BOARD:
GENERAL DESCRIPTION:
FMA3016-QFN is a high power packaged
MMIC amplifier for 3.5GHz WiMAX
applications. This device exhibits 17dB of
gain, has a P_sat of greater than 10W and
2.5% EVM with 10% PAE at 30dB transmit
power with a 64 QAM OFDM signal. The
part is packaged in a 20 lead air-cavity QFN
(8x6x1.4mm) with a copper lead frame for
enhanced thermal performance.
TYPICAL APPLICATIONS:
• WiMAX
• 802.16 Broadband wireless
ELECTRICAL SPECIFICATIONS:
PARAMETER
Frequency Range
CONDITIONS
Gain
Gain variation over
temperature
Input Return Loss
Output Return Loss
EVM @30dBm transmit
power
PAE @30dBm transmit
power
Output power at P1dB
Output IP3
-40 to +85 deg C
Base Plate Temperature
OFDM signal
OFDM signal
CW conditions
CW conditions
ACP @30dBm Pout
Noise Figure
Stability
VD1, VD2
VG1, VG2
7MHz BW, Adjacent Channel Power measured
in a 1MHz BW, offset by 7.5MHz from the
centre frequency
Unconditional across all frequencies with
appropriate decoupling networks
Class AB to obtain optimum linearity
MIN
3.4
9
8
-1.2
TYP
17
± 1.5
12
10
10
38
50
-52
MAX
3.6
UNITS
GHz
dB
dB
dB
dB
2.5
%
%
dBm
dBm
dBc
10
dB
10
V
-0.5
V
IDS
1.2
A
Tel: [phone]
1
Preliminary Specifications subject to change without notice
Filtronic Compound Semiconductors Ltd
Fax: [phone]
Email: [e-mail]
Website: www.filtronic.com