English
Language : 

FMA246_1 Datasheet, PDF (1/5 Pages) Filtronic Compound Semiconductors – HIGH GAIN X-BAND MMIC AMPLIFIER
HIGH GAIN X-BAND MMIC AMPLIFIER
FMA246
Preliminary Datasheet v3.0
FEATURES:
• 8.0 – 14.0 GHz Operating Bandwidth
• 2.5 dB Noise Figure
• 30 dB Small-Signal Gain
• 19 dm Output Power
• +6V Single Bias Supply
• Adjustable Operating Current
• DC De-coupled Input and Output Ports
GENERAL DESCRIPTION:
The FMA246 is a 3-stage, reactively matched
pHEMT high-gain MMIC amplifier designed for
use over the 8 to 14 GHz bandwidth. The
supply voltage can be varied from +3V to +6V
if needed. Operating current can be adjusted
using the source resistor ladders located along
the bottom edge, by bonding a particular pad
to ground. The amplifier is unconditionally
stable over all load states (-45 to +85°C), and
conditionally stable if the input port is open-
circuited.
LAYOUT:
TYPICAL APPLICATIONS:
• Low noise front end amplifiers
• General X-Band gain block
ELECTRICAL SPECIFICATIONS1:
PARAMETER
SYMBOL
Operating Frequency Bandwidth
BW
Small Signal Gain
S21
Operating Current
Small Signal Gain Flatness
Noise Figure
IOP
ΔS21
NF
3rd Order Intermodulation Distortion
Power at 1dB Compression
Input Return Loss
Output Return Loss
Reverse Isolation
IMD
P1dB
S11
S22
S12
CONDITIONS
VDD = +6 V IDD ≈ 60% IDSS
VDD = +6V
2
VDD = +6 V IDD ≈ 60% IDSS
2
VDD = +6 V IDD ≈ 60% IDSS
2
VDD = +6 V IDD ≈ 60% IDSS
POUT = +9 dBm SCL
2
VDD = +6 V IDD ≈ 60% IDSS
2
VDD = +6 V IDD ≈ 60% IDSS
2
VDD = +6 V IDD ≈ 60% IDSS
2
VDD = +6 V IDD ≈ 60% IDSS
MIN
8
27
105
-
-
TYP
N/A
29
150
± 0.6
2.5
-44
MAX
14
31
UNITS
GHz
dB
195
mA
± 1.0
dB
2.8
dB
-
dBc
18
20
-
dBm
-
-10
-8
dB
-
-16
-9
dB
-
-60
-50
dB
Note: 1. TAmbient = 22°C; Continuous operation at IDSS is not recommended
2. 60%IDSS is achieved by bonding pads "D", "G", and "K" (shown on page 2) to ground to drive the 1st,
2nd and 3rd stage amplifiers at 50%IDSS, 50%IDSS, and 75%IDSS respectively.
Tel: +44 (0) 1325 301111
1
Preliminary specifications subject to change without notice
Filtronic Compound Semiconductors Ltd
Fax: +44 (0) 1325 306177
Email: sales@filcs.com
Website: www.filtronic.com