SERIES-600-HIGH-DENSITY Datasheet, PDF (1/2 Pages) –

Series 600 High-Density
Typical Insertion Loss
80
Filtered Connectors
70
60
Capacitive Filter
The miniaturization of electronic systems and sub-systems
is pushing designers to increase circuit densities within
smaller packages. To address this growing need, API
Technologies’ Spectrum Control brand has developed a
line of filtered High-Density D-subminiature connectors.
This new line of connectors incorporates the high
performance and reliable filtering of API’s standard
D-subs in the High-Density format.
Features
I Connectors designed to MIL-C-24308
I Capacitance values from 85 pF to 4000 pF
I Filter type feed-through C
I Selectively specify and filter each contact position
I Available in feed-through capacitive configurations
Mechanical Specifications:
Same as Series 700 connectors, page FC21.
50
19
40
30
20
10
0
1MHz
18
10MHz
16
15
100MHz
Frequency
1GHz 5GHz
Above curves represent application of proper
grounding fundamentals, for assistance consult
with Spectrum Control.
Insertion loss measured per MIL-STD-220, no load, 50 ohm source and load.
Electrical Specifications
Current Rating . . . . 3 Amps
RF Current Rating. . 0.3 Amps
Contact Resistance . . 15 milliohms maximum
UL Recognized. . . . . Under category of communication
. . . . . . . . . . . . . . . . circuit accessories, File #E149046
Electrical Specifications: High-Density Connectors
Capacitance
Filter
Desig- Filter
nations Circuits
Value
Tol.
3 dB
Cut-off
Minimum Insertion Loss - Decibels (dB)
Fre- Dielectric Working
quency
Max.
(MHz)
With- Voltage DC
standing -55°C to ^{5 10 20 50 100 200 500 1}
2
5
Voltage +125°C ^{MHz MHz MHz MHz MHz MHz MHz GHz GHz GHz}
15
85 pF ±25%
60
300V
100V
———— 1
6 16 21 22 20
16
180 pF ±25%
28
300V
100V
——— 1
8 10 18 25 26 24
C
18
1000 pF ±25%
5.1
300V
100V
—3
8 14 20 25 32 35 41 39
19
4000 pF ±25%
1.3
300V
100V
8 13 19 26 31 37 45 48 52 47
Filter designation “G” for grounded contacts, “I” for insulated (not filtered) contacts.
Filter designation “O” for omitted contact and no hole in ground plane.
Above data represents guaranteed minimum.
Ordering Information
Example: 56-605-015-LI
56 - 6 0 5 - 0 15 - LI
This part number represents a Series 600 Hi-Density filtered D-Sub
connector with 15 contacts, pin-socket adapter configuration. The FT
filters have a capacitance value of 85 pF and the connector includes
4-40 locking inserts.
D-Sub
Connector
Hi-Density
Shell
Size**
0 = 15
1 = 26
2 = 44
3 = 62
4 = 78
- Standard connector
F - RoHS compliant version
Contact/Termination Special
Filter Designation
1 - Pin to solder cup
0 = All
15 - 85 pF FT
2 - Pin to 90° PCB mount* positions
16 - 180 pF FT
3 - Socket to PCB mount
same
18 - 1,000 pF FT
4 - Socket to 90° PCB* 9 = Special
19 - 4,000 pF FT
mount
loading
20 - Insulated contact
5 - Pin-socket adapter _{** Some shell sizes require minimum order quantity.}
7 - Pin to PCB mount
Consult API for details.
Note: VGA adapters also available. Consult factory
Options
LI = 4-40 inserts
S = Solder dip tails
50G = µ gold
GBL = Grounding board lock
* Required on right angle parts
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: [phone] • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: [phone] • Fax: [phone]
FC12