EF32-KH-12P-SS Datasheet, PDF (1/1 Pages) FERYSTER Inductive Components Manufacturer – PHOSPHOR BRONZE

210
Sketch with main dimensions
Bobbins with pins group &1 .
Forms and dimensions when fitted see chapter accessories B (fitting)
catalog page 285.
Please note: pin types 531-581/532-562/543-583,
dimension X2 see table below.
pin types 564/574 and 565
dimension X2 reduced by 2,5 mm
Without special note bobbin will be fitted with pin 561.
ST
with pins
04/02
&1
Pin type 532 - 562, 543 - 583 and 565 are to be preferred for dip soldering the winding-side connections. Bobbins fitted with these
terminals do not fit into the boxes.
z1 z2 b1 b2 b3 h1 h2 k
l1 l2 l3 l5 n1 n2 X1 X2 X3 *1 _Type
Art.
+0,2 +0,2 +0,1 +0,2 +0,2 +0,1 +0,2 +0,2 +0,2 +0,2 +0,2 +0,2 +0,2 +0,1 +0,2 +0,2
No.
9,7 9,7 9,8 22,1 24 9,8 22,6 6
20,4 21,7 27,2 29,7 0,6 1
4x5
27,5 2x5
EE 32/9,8/1 ST
EE 32/9,8/2 ST
Wz 6450/1 ST
Wz 6450/2 ST
2645
2952
15,7 15,7 9,8 22,1 24 9,8 22,6 6
32,4 33,7 39,4 39,7 0,6 1
4x5
37,5 2x5
EE 32L/9,8/1 ST
EE 32L/9,8/2 ST
Wz 6383/1 ST
Wz 6383/2 ST
2406
2852
Sketch with main dimensions
Standard: fully pinned, partial fitting on request.
t = standard pin length alternative pin length in brackets.
The grid distances X1/X2 can be used for metric and for inch measures.
ST
with molded-in pins 1 0,8 mm
z1 z2 b1 b2 b3 h1 h2 k l1 l2 l5 l6 n1 n2 t X1 X2 X3 *1 Type
Art.
+0,2 +0,2 +0,1 +0,2 +0,2 +0,1 +0,2 +0,2 +0,2 +0,2 +0,3 +0,3 +0,2 +0,1 +0,2 +0,2 +0,2
No.
- - 9,8 22,3 32 9,8 23,6 6,2 20,3 21,8 29,5 35,8 0,7 - 3 (4,4) 5x5 25 2x6 EE 32/9,8/1 ST
Wz 6694/1 ST
1802
9,6 9,6 9,8 22,3 32
9,8 23,6 6,2 20,3 21,8 29,5 35,8 0,7 1,1 3 (4,4) 5x5 25
2x6
EE 32/9,8/2 ST
Wz 6694/2 ST
with closed middle flange
1413
9,6 9,6 9,8 22,3 32
9,8 23,6 6,2 20,3 21,8 29,5 35,8 0,7 1,1 3 (4,4) 5x5 25
2x6
EE 32/9,8/2 ST
Wz 6694/2 ST *54
with slotted middle flange
1367
*1
*54
X3 = max. number of slots or terminals
Slot width 1.7 mm for slotted middle flange.