E16-3C90-A63 Datasheet, PDF (5/6 Pages) Ferroxcube International Holding B.V. – E cores and accessories

Ferroxcube
E cores and accessories
E16/8/5
COIL FORMER
General data for 9-pins E16/8/5 coil former
PARAMETER
Coil former material
Pin material
Maximum operating temperature
Resistance to soldering heat
Solderability
SPECIFICATION
phenolformaldehyde (PF), glass reinforced, flame retardant in accordance with
“UL 94V-0”; UL file number E41429 (M)
copper-clad steel, tin (Sn) plated
180 °C, “IEC 60085”, class H
“IEC 60068-2-20”, Part 2, Test Tb, method 1B, 350 °C, 3.5 s
“IEC 60068-2-20”, Part 2, Test Ta, method 1, 235 °C, 2 s
15
11.1 ± 0.2
11.15 ± 0.2
5
6.4 ± 0.2
4.9 ± 0.15
9.5 ± 0.2
14.9 ± 0.3
4.9 ± 0.15
4 ± 0.3
0.64 ± 0.05
19.8 ± 0.3
0.64 ± 0.05
17 ± 0.3
23.8 ± 0.4
2.5 ± 0.2
Dimensions in mm.
Fig.3 E16/8/5 coil former; 9-pins.
7
14
MFW047
Winding data and area product for 9-pins E16/8/5 coil former; note 1
NUMBER OF
SECTIONS
1
WINDING
AREA
(mm²)
20.2
MINIMUM
WINDING
WIDTH
(mm)
9.6
AVERAGE
LENGTH OF
TURN
(mm)
35
AREA
PRODUCT
Ae x Aw
(mm⁴)
406
TYPE NUMBER
CSH-E16/8/5-1S-9P
Note
1. This coil former is optimized for the use of triple-isolated wire. This wire is approved for safety isolation without the
usual creepage distance.
2008 Sep 01
330