CSH-E16-1S-9P Datasheet, PDF (1/1 Pages) Ferroxcube International Holding B.V. – E cores and accessories

Ferroxcube
E cores and accessories
E16/8/5
COIL FORMER
General data for 9-pins E16/8/5 coil former
PARAMETER
Coil former material
Pin material
Maximum operating temperature
Resistance to soldering heat
Solderability
SPECIFICATION
phenolformaldehyde (PF), glass reinforced, flame retardant in accordance with
“UL 94V-0”; UL file number E41429 (M)
copper-clad steel, tin-lead alloy (SnPb) plated
180 C, “IEC 60085”, class H
“IEC 60068-2-20”, Part 2, Test Tb, method 1B, 350 C, 3.5 s
“IEC 60068-2-20”, Part 2, Test Ta, method 1, 235 C, 2 s
Winding data 9-pins for E16/8/5 coil former; note 1
NUMBER OF
SECTIONS
1
WINDING
AREA
(mm²)
20.6
MINIMUM
WINDING
WIDTH
(mm)
9.6
AVERAGE
LENGTH OF
TURN
(mm)
35
TYPE NUMBER
CSH-E16/8/5-1S-9P
Note
1. This coil former is optimized for the use of triple-isolated wire. This wire is approved for safety isolation without the
usual creepage distance.