CPHS-FRM27-6S-8P Datasheet, PDF (1/1 Pages) Ferroxcube International Holding B.V. – Frame and Bar cores and accessories

Ferroxcube
Frame and Bar cores and accessories
FRM27/3.8/9
COIL FORMERS
General data
PARAMETER
Coil former material
Pin material
Maximum operating temperature
Resistance to soldering heat
Solderability
SPECIFICATION
liquid crystal polymer (LCP), glass-reinforced, flame retardant in accordance with
“UL 94V-0”; UL file number E54705(M)
copper-tin alloy (CuSn), tin-lead alloy (SnPb) plated
155 °C, “IEC 60085”, class F
“IEC 60068-2-20”, Part 2, Test Tb, method 1B, 350 °C, 3.5 s
“IEC 60068-2-20”, Part 2, Test Ta, method 1: 235 °C, 2 s
0.9
handbook, full pagewidth
3.0
27.3 min.
19.2 max.
0.7
25
29.9
35.0 ±0.25
36.0 ±0.25
4.75
− 0.1
9.2 ±0.1
5.35
0.4
CBW545
32.5 ±0.15
0.4
0.5+00.05
0.4 ±0.05 (×4)
9.2 ±0.1
1.6
2.7
2.6 (×5)
Dimensions in mm.
Fig.3 SMD coil former for FRM27/3.8/9.
Winding data
NUMBER OF NUMBER OF
SECTIONS SOLDER PADS
WINDING
AREA
(mm²)
6
8
1.75 + 5 × 1.7
WINDING
WIDTH
(mm)
2.7 + 5 × 2.6
AVERAGE
LENGTH OF
TURN
(mm)
18.5
TYPE NUMBER
CPHS-FRM27/9-6S-8P