CPHS-FRM24-8S-9P Datasheet, PDF (1/1 Pages) Ferroxcube International Holding B.V. – Frame and Bar cores and accessories

Ferroxcube
Frame and Bar cores and accessories
FRM24/3.5/10
COIL FORMERS
General data
PARAMETER
Coil former material
Pin material
Maximum operating temperature
Resistance to soldering heat
Solderability
SPECIFICATION
liquid crystal polymer (LCP), glass-reinforced, flame retardant in accordance with
“UL 94V-0”; UL file number E54705(M)
copper-tin alloy (CuSn), tin-lead alloy (SnPb) plated
155 °C, “IEC 60085”, class F
“IEC 60068-2-20”, Part 2, Test Tb, method 1B, 350 °C, 3.5 s
“IEC 60068-2-20”, Part 2, Test Ta, method 1: 235 °C, 2 s
handbook, full pagewidth
1.15
1.05 0.4
18.8 ±0.1
30.05 ±0.15
31.9 ±0.15
0.48
0.3
4.3
27.95 ±0.15
1.6 (×7)
3.7
8.1 9.7
6.8
5.15
4.6
2.2 2.75
CBW546
0.5
0.9
Dimensions in mm.
0.3 (×6)
0.4
6.1
1.6
4.8
Fig.3 SMD coil former for FRM24/3.5/10.
Winding data
NUMBER OF NUMBER OF
SECTIONS SOLDER PADS
WINDING
AREA
(mm²)
8
9
5.9 + 7 × 1.23
WINDING
WIDTH
(mm)
3.7 + 7 × 1.6
AVERAGE
LENGTH OF
TURN
(mm)
17.3
TYPE NUMBER
CPHS-FRM24/10-8S-9P