LM358_1 Datasheet, PDF (2/5 Pages) First Components International – Low Power Dual Operational Amplifier Large DC voltage gain: 100dB

LM358 Low Power Dual Operational Amplifier
MAXIMUM RATINGS^*
Symbol
Parameter
Value
Unit
VCC Power Supply Voltages
Single Supply
Split Supplies
32
V
±16
VIDR Input Differential Voltage Range (1)
±32
V
VICR Input Common Mode Voltage Range
-0.3 to 32
V
ISC
Output Short Circuit Duration
Continuous
TJ
Junction Temperature
Plastic Packages
150
°C
Tstg Storage Temperature
Plastic Packages
°C
-55 to +125
IIN
Input Current, per pin (2)
50
mA
TL
Lead Temperature, 1mm from Case for 10 Seconds
260
°C
*_{Maximum Ratings are those values beyond which damage to the device may occur.}
Functional operation should be restricted to the Recommended Operating Conditions.
+Derating - Plastic DIP: - 10 mW/°C from 65° to 125°C
SOIC Package: : - 7 mW/°C from 65° to 125°C
Notes:
1. Split Power Supplies.
2. VIN<-0.3V. This input current will only exist when voltage at any of the input leads is driven negative.
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
VCC
DC Supply Voltage
TA
Operating Temperature, All Package Types
Min
Max
Unit
±2.5 ±15 or
V
or 5.0
30
0
+70
°C
This device contains protection circuitry to guard against damage due to high static voltages or
electric fields. However, precautions must be taken to avoid applications of any voltage higher than
maximum rated voltages to this high-impedance circuit. For proper operation, VIN and VOUT should be
constrained to the range GND≤(VIN or VOUT)≤VCC.
Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or VCC).
Unused outputs must be left open.
2