SA5.0 Datasheet, PDF (1/4 Pages) First Components International – 5.0V to 170V GPP TRANSIENT VOLTAGE SUPPRESSORS

Data Sheet
5.0V to 170V GPP TRANSIENT
VOLTAGE SUPPRESSORS
Description
TVS
Device
Load
Uni-Polar
Mechanical Dimensions
JEDEC
204-AC
.240
1.00 Min.
.255
TVS
Device
Load
.120
.140
.031 typ.
Bi-Polar
Features
n 500 WATT PEAK POWER PROTECTION
n EXCELLENT CLAMPING CAPABILITY
n FAST RESPONSE TIME
n TYPICAL I_R < 1µA ABOVE 10V
n GLASSPASSIVATEDCHIPCONSTRUCTION
n MEETS UL SPECIFICATION 94V-0
SA5.0...170
Units
Maximum Ratings
Peak Power Dissipation...P_PK
T_P = 1ms (Note 5)
......................................... 500 Min. ..........................................
Steady State Power Dissipation...P_D
@ T_L = 75°C
............................................. 1 ...............................................
Non-Repetitive Peak Forward Surge Current...I_FSM
............................................. 7 0 ...............................................
@ Rated Load Conditions, 8.3 ms, ½ Sine Wave, Single Phase
(Note 3)
Watts
Watts
Amps
Forward Voltage @ 50A...V_F
(Undirectional Only)
............................................. 3.5 ............................................... Volts
Weight...G_RM
Soldering Requirements (Time & Temp)...S_T
@ 300°C
............................................. 0.4 ............................................... Grams
............................................. 10 Sec. ........................................... Min. to
Solder
Operating & Storage Temperature Range...T_J, T_STRG ......................................... -55 to 175 .......................................... ^°C
NOTES: 1. For Bi-Directional Applications, Use C or CA. Electrical Characteristics Apply in Both Directions.
2. Lead Length .375 Inches.
3. 8.3 ms, ½ Sine Wave, Single Phase Duty Cycle, @ 4 Pulses Per Minute Maximum.
4. V_BR Measured After I_T Applies for 300 µs. I_T = Square Wave Pulse or Equivalent.
5. Non-Repetitive Current Pulse. Per Fig. 3 and Derated Above T_A = 25°C per Fig. 2.
Page 11-6