P6KE Datasheet, PDF (1/4 Pages) Pan Jit International Inc. – GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 6.8 TO 440 Volts 600Watt Peak Power 5.0 Watt Steady State)

Data Sheet
6.8V to 200V GPP TRANSIENT
VOLTAGE SUPPRESSORS
Description
TVS
Device
Load
Uni-Polar
TVS
Device
Load
Bi-Polar
Mechanical Dimensions
JEDEC
D0-15
.104
.140
.230
1.00 Min.
.300
.031 typ.
Features
n 600 WATT PEAK POWER PROTECTION
n EXCELLENT CLAMPING CAPABILITY
n FAST RESPONSE TIME
n TYPICAL I_R < 1µA ABOVE 10V
n GLASSPASSIVATEDCHIPCONSTRUCTION
n MEETS UL SPECIFICATION 94V-0
Maximum Ratings
Peak Power Dissipation...P_PK
T_P = 1ms (Note 5)
P6KE Series
(For Bi-Polar Applications, See Note 1) Units
......................................... 600 Min. .......................................... Watts
Steady State Power Dissipation...P_D
@ T_L= 75°C
............................................. 5 ............................................... Watts
Non-Repetitive Peak Forward Surge Current...I_FSM
............................................. 100 ...............................................
@ Rated Load Conditions, 8.3 ms, ½ Sine Wave, Single Phase
(Note 3)
Amps
Weight...G_RM
............................................. 0.34 ............................................... Grams
Soldering Requirements (Time & Temp)...S_T
@ 250°C
............................................. 10 Sec. ........................................... Min. to
Solder
Operating & Storage Temperature Range...T_J, T_STRG ......................................... -65 to 175 .......................................... ^°C
NOTES: 1. For Bi-Directional Applications, Use C or CA. Electrical Characteristics Apply in Both Directions.
2. Mounted on 40mm² Copper Pads.
3. 8.3 ms, ½ Sine Wave, Single Phase Duty Cycle, @ 4 Pulses Per Minute Maximum.
4. V_BR Measured After I_T Applies for 300 µs. I_T = Square Wave Pulse or Equivalent.
5. Non-Repetitive Current Pulse. Per Fig. 3 and Derated Above T_A = 25°C Per Fig. 2.
Page 11-10