KBPC2500 Datasheet, PDF (1/4 Pages) EIC discrete Semiconductors – SILICON BRIDGE RECTIFIERS

Description
25Amps
Single Phase Silicon Bridge
KBPC
Features
Surge overload ratings to 300 amperes
This series is UL listed under the Recognized
Component Index, file number E142814
The plastic material used carries Underwriters Laboratory
flammability recognition 94V-0
Universal 4-way terminals, snap-on, wrap-around,
solder or P.C. Board mounting
High temperature soldering guaranteed 265 C/10
seconds at 5 lbs (2.3kg) tension
Mechanical Data
Case: Metal case
Terminals: Plated .25" (6.53mm) Faston
Mounting Position: Bolt down on heat-sink with silicone thermal
compound between bridges and mounting surface for
maximum heat transfer efficiency
Mounting Position: Any
Weight: 1.024 ounce, 29 grams (approx)
Maximum Ratings & Thermal Characteristics
Rating at 25 C ambient temperature unless otherwise specified, Resistive or Inductive load, 60 Hz.
For Capacitive load derate current by 20%.
Parameter
Symbol
KBPC
2500
KBPC
2501
KBPC
2502
KBPC
2504
KBPC
2506
KBPC
2508
KBPC
2510
unit
Maximum repetitive peak reverse voltage
VRRM 50 100 200 400 600 800 1000 V
Maximum RMS bridge input voltage
VRMS 35 70 140 280 420 560 700 _V
Maximum DC blocking voltage
VDC 50 100 200 400 600 800 1000 V
Maximum average forward rectified
output current at TA=55 C
IF(AV)
25
A
Peak forward surge current single sine-wave
superimposed on rated load (JEDEC Method)
IFSM
300
Rating for fusing ( t<8.3ms)
I² t
374
A
A²sec
Typical thermal resistance per element (1)
ReJA
2.1
C/W
Isolation voltage from case to leads
VIS
2500
Vac
Operating junction and storage temperature
range
TJ,
TSTG
-55 to + 150
Electrical Characteristics
Rating at 25 C ambient temperature unless otherwise specified. Resistive or Inductive load, 60Hz.
For Capacitive load derate by 20 %.
Parameter
Symbol
KBPC KBPC
2500 2501
KBPC
2502
KBPC
2504
KBPC
2506
KBPC
2508
KBPC
2510
Unit
Maximum instantaneous forward voltage drop
per leg at 12.5A
VF
1.0
V
Maximum DC reverse current at rated TA =25 C _IR
DC blocking voltage per element TA =125 C
10
500
A
Notes: (1)Thermal resistance from Junction to Ambemt on P.C.board mounting.