KBJ200 Datasheet, PDF (1/2 Pages) First Components International – 2.0 A Single-Phase Silicon Bridge Rectifier High surge current capability

Data Sheet
Description
2.0 A Single-Phase
Silicon Bridge Rectifier
Mechanical Dimensions
19.6 ⁺ 0.5
4.2 ⁺ 0.2
2.0 ⁺ 0.4
11.0 ⁺ 0.3
+~~ ^_
1.8 ⁺ 0.2
13.0 ⁺ 0.3
3.4 ⁺ 0.2
KBJ-2
5.1 ⁺ 0.3
1.0 ⁺ 0.1
0.40 ⁺ 0.11
Dimensions in millimeters(1mm =0.0394inch )
Features
This series is UL listed under the Recognized
Component Index, file number E142814
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
High case dielectric strength of 1500VRMS
Ideal for printed circuit boards
High surge current capability
Mechanical Data
Case : Molded plastic body over passivated junctions
Terminals : Plated leads solderable per MIL-STD-750,
Method 2026
Polarity : Polarity symbols molded on body
Mounting Position : Any(3)
Mounting Torque : 5 in-lbs max.
Weight : 0.15 ounce, 4.0 grams (approx)
Maximum Ratings & Thermal Characteristics
Rating at 25 C ambient temperature unless otherwise specified, Resistive or Inductive load, 60 Hz.
For Capacitive load derate current by 20%.
Parameter
Symbol
KBJ
200
KBJ KBJ KBJ KBJ KBJ
201 202 204 206 208
Maximum repetitive peak reverse voltage
VRRM 50 100 200 400 600 800
Maximum RMS voltage
VRMS 35 70 140 280 420 560
Maximum DC blocking voltage
VDC 50 100 200 400 600 800
Maximum average forward rectified
output current
TA =25 C ^IF(AV)
2.0(1)
Peak forward surge current single sine-wave
superimposed on rated load (JEDEC Method)
Rating for fusing ( t<8.3ms)
IFSM
I² t
50.0
60
Maximum thermal resistance per leg
RejA
RejC
2.6(2)
5 (1)
Operating junction and storage temperature
range
TJ,
TSTG
-55 to + 150
KBJ
210
Unit
1000 ^V
700 _V
1000 V
A
A
A²sec
C/W
Electrical Characteristics
Rating at 25 C ambient temperature unless otherwise specified. Resistive or Inductive load, 60Hz.
For Capacitive load derate by 20 %.
Parameter
Symbol
KBJ
200
KBJ KBJ KBJ KBJ KBJ
201 202 204 206 208
Maximum instantaneous forward voltage drop
per leg at 2.0A
VF
1.1
Maximum DC reverse current at
rated DC blocking voltage per leg
TA=25 C
TA=125 C
IR
10
250
Notes: (1)Unit case mounted on Al plate heatsink.
(2)Units mounted on P.C.B. with 0.5x0.5"(12x12mm) copper pads and 0.375"(9.5) lead length.
(3)Recommended mounting position is to bolt down on heat sink with silicone thermal compound for
maximum heat transfer with #6 screw.
KBJ
210
Unit
V
A