5KP Datasheet, PDF (1/4 Pages) Surge Components – GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-5.0 to 110 Volts

Data Sheet
5.0V to 110V GPP TRANSIENT
VOLTAGE SUPPRESSORS
Description
TVS
Device
Load
Uni-Polar
TVS
Device
Load
Bi-Polar
Mechanical Dimensions
JEDEC
R6
.340
.360
.340
1.00 Min.
.360
.050 typ.
Features
n 5000 WATT PEAK POWER PROTECTION
n EXCELLENT CLAMPING CAPABILITY
n FAST RESPONSE TIME
n TYPICAL I_R < 1µA ABOVE 10V
n GLASSPASSIVATEDCHIPCONSTRUCTION
n MEETS UL SPECIFICATION 94V-0
Maximum Ratings
5KP Series
Units
Peak Power Dissipation...P_PK
T_P = 1ms (Note 5)
......................................... 5000 .......................................... Watts
Steady State Power Dissipation...P_D
@ T_L = 75°C
............................................. 5 ............................................... Watts
Non-Repetitive Peak Forward Surge Current...I_FSM
............................................. 400 ...............................................
@ Rated Load Conditions, 8.3 ms, ½ Sine Wave, Single Phase
(Note 3)
Amps
Weight...G_RM
Soldering Requirements (Time & Temp)...S_T
@ 250°C
............................................. 2.10 ............................................... Grams
......................................... 10 Sec. .......................................... Min. to
Solder
Operating & Storage Temperature Range...T_J, T_STRG ......................................... -55 to 175 .......................................... °C
NOTES: 1. For Bi-Directional Applications, Use C or CA. Electrical Characteristics Apply in Both Directions.
2. Mounted on 20mm² Copper Pads.
3. 8.3 ms, ½ Sine Wave, Single Phase Duty Cycle, @ 4 Pulses Per Minute Maximum.
4. V_BR Measured After I_T Applies for 300 µs. I_T = Square Wave Pulse or Equivalent.
5. Non-Repetitive Current Pulse. Per Fig. 3 and Derated Above T_A = 25°C Per Fig. 2.
Page 11-18