70232-115 Datasheet, PDF (8/8 Pages) FCI connector – METRAL SIGNAL HEADER 1 MOD, 4 ROW PRESS-FIT

PRODUCT NUMBER
70232-XYY
70232-XYYLF
A
B
REV E - 2006-04-18
12
3
4
NOTES:
1. FOR DIM A AND B SEE SHEET 2 AND UP.
2. BODY MATERIAL: LIQUID CRYSTAL
POLYMER 30 % GLASS.
FLAME RETARDANT ACC. UL 94-V0.
3. PIN MATERIAL:
PHOSPHOR BRONZE.
4. PLATING ON PRESS-FIT TAIL:
70232 -XYY IS SnPb
70232-XYYLF IS SN (LEAD FREE)
PLATING ON CONTACT AREA CONFORMS TO PERFORMANCE
LEVEL SHOWN IN TABLE.
5. PRODUCT MARKING:
PART NUMBER DESIGNATION & BATCH I.D.
6. ALL PRODUCTS WITH PART NUMBERS SHOWN IN
SUBSEQUENT TABLES WILL BE PACKAGED IN TUBES.
IF TRAY PACKAGING IS REQUIRED, A SUFFIX "P"
WILL BE ADDED TO THE END OF THE PART NUMBER.
EXAMPLE: XXXXX-XXXP OR XXXXX-XXXPLF
7. PRODUCT SPECIFICATION GS-12-180
APPLICATION SPECIFICATION BUS-20-073
8. AFTER INSERTION INTO CIRCUIT BOARD WITH
A
QUALIFIED TOOL.
9. -A PLATING HAS Au FLASH IN PRESS FIT
AREA (LEAD FREE).
10. THE PRODUCTS WHERE THE PART NUMBER ENDS IN LF MEET THE
EUROPEAN UNION DIRECTIVES AND OTHER COUNTRY REGULATIONS
AS DESCRIBED IN GS-22-008.
11. FOR LEAD FREE PART NUMBERS, ADD AN "LF" SUFFIX.
EXAMPLE: 70232-X01LF
12. ALL PRODUCTS EXCEPT THOSE WITH PART NUMBERS CONTAINING
(DRAWING NO.)-N1--- OR (DRAWING NO.)-N5---WILL WITHSTAND EXPOSURE
T0 260 C FOR 60 SECONDS IN A CONVECTION, INFRA-RED OR
VAPOR PHASE REFLOW OVEN. PART NUMBERS (DRAWING N0.)-N1---
AND (DRAWINGS NO.)-N5---WILL NOT WITHSTAND REFLOW AND Au CONTACT
SURFACE OF THE CONTACTS SHALL BE EXPOSED TO A MAXIMIM 140 C FOR
NO LONGER THAN 15 SECONDS IN A WAVE SOLDER APPLICATION.
12
mat'l code
ltr
ecn no.
dr
AM
sheet
index
revision
sheet
--
tolerances unless
otherwise specified
CUSTOMER
date
linear
0.X 0.3
0.XX 0.13
COPY
projection
.XXX .051
angles
dr
engr
chr
appd
0
T.BRUNGARD
M.STRAWSER
M.STRAWSER
M.STRAWSER
2
11/19/99
11/19/99
11/19/99
02/29/00
MM
scale
1:1
www.fciconnect.com
title_{METRAL SIGNAL HEADER}
1 MOD, 4 ROW PRESS-FIT
product family
size
dwg no
METRAL ^code
213
A ⁷⁰²³²
sheet
8
B
Pro/E
cage code
3
22526
4
PDM: Rev:AM
STATUS:Released Printed: Jan 17, 2011.