58441-001LF Datasheet, PDF (3/4 Pages) FCI connector – EYEMAX® 4X HIGH-SPEED SERIAL I/O LINKS

EYEMAX^® 4X HIGH-SPEED SERIAL I/O LINKS
EYEMAX^® 4X CABLE PLUG KITS
PART NUMBERS
FEATURES & BENEFITS
Shielded Structure for low cross-talk
M2.5 thumbscrew option for robust attachment to threaded
hex standoffs
Robust active-latch option for easy connect and disconnect
Die-Cast shells for enhanced EMI shielding
Kits available with or without attached optimized paddle card
Kits come with 3 cable exit collar sizes for various cable diameters
No crimp tooling required for cable exit
Description
4X plug kit - latching version, 8 signal pairs
4X plug kit - latching version, 8 signal pairs, passive equalization
4X plug kit - thumbscrew version, 8 signal pairs
4X plug kit - thumbscrew version, 8 signal pairs, passive equalization
With P1paddlecard
58441-001LF
58441-004LF
10013923-001LF
10013923-004LF
With P2 paddlecard
58441-101LF
58441-104LF
10013923-101LF
10013923-104LF
For ease of wire management, a P1 paddlecard is recommended on one end of a cable and a P2 paddlecard in the other end.
EYEMAX^® 4X BOARD-MOUNT RECEPTACLES
FEATURES & BENEFITS
Shielded Structure for low cross-talk
Option for threaded hex standoffs to accept
M2.5 thumbscrews on cable connectors
Clip or screw options for attaching latch-type
PCB connectors to panels or brackets
Right-angle, surface-mount connectors are
compatible with conventional reflow soldering
processes
Locating pegs optional for manual or automated
placement
Soldered posts secure connector to PCB
PART NUMBERS
Description
PCB Thickness
4X, latching version with mounting ears, without alignment pegs
1.6 mm
4X, latching version with mounting ears, with alignment pegs
2.4 mm
4X, latching version without mounting ears, without alignment pegs
1.6 mm
4X, latching version without mounting ears, with alignment pegs
2.4 mm
4X, thumbscrew version, without alignment pegs, with foam EMI gasket
2.4 mm
4X, thumbscrew version, without alignment pegs, without foam EMI gasket 1.6 mm
4X, thumbscrew version, without alignment pegs, without foam EMI gasket 2.4 mm
4X, thumbscrew version, with alignment pegs, without foam EMI gasket
2.4 mm
4X, thumbscrew version, with alignment pegs, without foam EMI gasket
4.0 mm
Part Numbers
58369-111010LF
58369-112110LF
58368-111010LF
58368-112110LF
10009629-102010LF
10009629-111010LF
10009629-112010LF
10009629-112110LF
10009629-113110LF
Latching versions without mounting ears require a panel clip to attach the connector to a panel or PCI bracket. The panel clip part number
is dependent upon the panel thickness and is sold separately. Reference the connector drawing for part numbers.
Additional information can be found at www.fci.com/eyemax
www.fci.com