RSS-24MCW-FR Datasheet, PDF (1/4 Pages) FCI connector – Cooper-Wheelock

Cooper-Wheelock
RSS-RSSP Series
Description
The Cooper-Wheelock Series RSS Strobes and
RSSP Strobe Plates have low current draw while
maintaining outstanding performance, reliability, and
cost effectiveness. These versatile appliances will
satisfy virtually all requirements for indoor, wall, or
ceiling mount applications.
Strobe options for wall mount modules include
15/75, or the MCW multi-candela strobe with field
selectable settings of 15/30/75/100 cd, or the high
intensity MCWH strobe with field selectable 135/185
cd settings. Ceiling mount models include the MCC
multi-candela ceiling strobe with field selectable set-
tings of 15/30/75/95 cd, or the high intensity MCCH
strobe with field selectable 115/177 cd settings.
All models may be synchronized with the Cooper-
Wheelock SM or DSM Sync Modules. Synchronized
strobes can eliminate possible restrictions on the
number of strobes in the field of view. Cooper-
Wheelock’s synchronized strobes offer an easy way
to comply with ADA recommendations concerning
photosensitive epilepsy as well as meeting the re-
quirements of NFPA 72.
Cooper-Wheelock’s Series RSS Strobes employ an
Integral Strobe Mounting Plate that can be mounted
to a single gang, double gang, 4” square, 100 mm
European backbox or to the SHBB surface back
box. If the flush backbox has side or top space be-
tween it and the finished wall, the NATP (Notification
Appliance Trimplate) may be used. It provides an
additional 0.65” of trim for the appliance. An attrac-
tive cover plate is provided for a clean, finished ap-
pearance on all models.
The Series RSSP Multi-candela Strobe Plate is a
cost effective way to retrofit required wall strobe ap-
pliances to bells, horns, chimes, multitone devices,
or speakers and easily mounts to standard 4” back-
boxes or for surface mount use with the Cooper-
Wheelock SBL2 surface backbox.
Single & Multi-Candela
RSS Series Strobes,
RSSP Series Strobe Plates
RSS Series
RSS Series
RSS Series
Features
Multi-Candela Indicator
(bottom of lens)
• Approvals include:
- UL Standard 1971 - California State Fire Marshal
(CSFM)
- New York City (MEA) - Factory Mutual (FM)
• ADA/NFPA/UFC/ANSI compliant.
• Wall mounted models are available with field selectable
multi-candela settings of 15, 30, 75, or 110 cd with high
intensity models settable to 135 or 185 cd.
• Ceiling mounted models are available with field select-
able multi-candela settings of 15, 30, 75, or 95 cd with
high intensity models set to 115 or 177 cd.
• Single candela models provide 15/75 cd.
• Strobes flash once per second over the regulated
voltage range.
• 12 & 24 VDC models with wide UL “regulated volt age
range” using filtered DC or unfiltered FWR input volt
age.
• Synchronize with SM or DSM sychronization modules.
• Fast installation with IN/OUT screw terminals using #12
to #18 AWG wires.
An ISO 9000-2000 Company
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472 - Tel: [phone] - Fax: [phone]
Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.
©_{2006 Gamewell-FCI. All rights reserved.}
www.gamewell-fci.com
9020-0575 Rev. B page 1 of 4