HM2A30PG5000LF Datasheet, PDF (1/7 Pages) FCI connector – Millipacs (2 mm Hard-Metric) Signal Connector – IEC specifications

TYPE
PRODUCT SPECIFICATIONS
TITLE
Millipacs (2 mm Hard-Metric) Signal Connector –
IEC specifications
NUMBER
GS-12-203
PAGE
1 of 7
AUTHORIZED BY
REVISION
C
DATE
STATUS
UNRESTRICTED
1.0 OBJECTIVE
This specification defines the IEC test requirements of the Millipacs (2 mm Hard-Metric) signal connector.
These are required for Millipacs to comply with the IEC 1076-4-101 Hard Metric standards.
2.0 SCOPE
This specification is applicable to the termination characteristics of the Millipacs which provides a
separable interconnect for printed circuit boards.
3.0 GENERAL
This document is composed of the following sections:
Paragraph Title
1.0
OBJECTIVE
2.0
SCOPE
3.0
GENERAL
4.0
IEC REPORT
Copyright 2001 FCI USA, INC.
Form E-3334 09/18/00
GS-01-001
PDM: Rev:C STATUS:Released Printed: Nov 27, 2010.