GS-29-616 Datasheet, PDF (1/7 Pages) FCI connector – SFP+® Cable and Connector System

NUMBER
TITLE
GS-29-616
TYPE
PRODUCT QUALIFICATION SUMMARY
SFP+® Cable and Connector System
PAGE
REVISION
1 of 7
A
AUTHORIZED BY
J. Kopec
DATE
04/26/2010
CLASSIFICATION
UNRESTRICTED
1.0 OBJECTIVE
This document summarizes qualification test results to demonstrate compliance of FCI SFP+ cable and
connector system to the requirements of the FCI SFP+ product specification(s) listed in Section 5.0.
2.0 SCOPE
This summary includes results from qualification testing of SFP+ cable assemblies consisting of 32AWG,
30AWG, 28AWG, 26AWG, & 24AWG wire gages, US or China-sourced paddleboards, and Leoni or LTK
cable. The connectors were qualified in accordance with FCI product specification GS-12-616.
3.0 CONCLUSION
The results obtained for all tested product configurations successfully met the requirements of FCI product
specification GS-12-616.
4.0 DEFINITIONS
MIL-STD:
EIA:
ANSI:
LLCR:
CR:
MFG:
IR:
DWV:
Military Standard
Electronic Industries Alliance
American National Standards Institute
Low Level Contact Resistance
Contact Resistance
Mixed Flowing Gas
Insulation Resistance
Dielectric Withstanding Voltage
5.0 REFERENCE DOCUMENTS
5.1 Product Specification GS-12-616, Rev. C
5.2 EIA 364 Series Test Procedures
5.3 U.S. Product Test Laboratory Report EL-2010-01-037, Rev. C
Copyright FCI
Form E-3334
Rev F
PDM: Rev:A
GS-01-001
STATUS:Released Printed: Nov 29, 2010.