87024-630LF Datasheet, PDF (1/21 Pages) FCI connector – Ribcage™ II Printed Wiring Board Connector System

NUMBER
BUS-12-087
TYPE
PRODUCT SPECIFICATION
TITLE
Ribcage™ II Printed Wiring Board Connector System
PAGE
REVISION
1 of 21
M
AUTHORIZED BY
C. Martinez
DATE
27 Feb 07
CLASSIFICATION
UNRESTRICTED
1.0 GENERAL
This specification covers gold plated Rib CageTM II Printed Wiring Board Connectors designed for parallel
(vertical) interconnection of printed wiring boards in low power applications as well as Lead Free product that
meets the requirement of the European Union Directives of Restriction for Hazardous Substances (Directive
2002/95/EC).
The receptacle assemblies (Figure 1) are designed for mating with shrouded headers (Figure 2) having
double rows of .018 inch formed pins on .050 inch centers. This specification is composed of the following
sections:
Paragraph Title
Page
1.0
GENERAL
1
2.0
APPLICABLE DICUMENTS
1
3.0
REQUIREMENTS
2
3.1
Qualification
2
3.2
Materials-Receptacle Assemblies
2
3.3
Materials-Shrouded Headers
3
3.4
Design and Construction
3
3.5
Electrical Characteristics
3
3.6
Mechanical Characteristics
9
3.7
Environmental Conditions
11
4.0
PRODUCT QUALIFICATION PROVISIONS
15
4.1
Equipment Calibration
15
4.2
Inspection Conditions
15
4.3
Qualification Inspection
15
4.4
Requalification Testing
15
2.0 APPLICABLE DOCUMENTS
The following documents, of the issue in effect on the date of the latest revision of this specification, shall
form a part of this specification to the extent specified herein.
SPECIFICATIONS
Federal
QQ-S-571 Solder:
Lead Alloy, Tin-lead Alloy, and Tin Alloy; Flux cored Ribbon
and Wire, Solid Form
QQ-N-290
Nickel Plating, Electrodeposited
Military
MIL-F-14256
MIL-M-24519
MIL-G-45204
MIL-C-45662
MIL-F-55110
Flux, Soldering, Liquid (Rosin Base), Activated
Molding Plastics, Polyester, Thermoplastic
Gold Plating, Electrodeposited
Calibration System Requirement
Printed Wiring Boards
Copyright FCI
Form E-3334
Rev F
PDM: Rev:M
GS-01-001
STATUS:Released Printed: Mar 12, 2008.