77311-118-02LF Datasheet, PDF (1/8 Pages) FCI connector – Duplex Plated Bergstik® II Headers

TYPE
PRODUCT SPECIFICATION
NUMBER
BUS-12-114
TITLE
Duplex Plated Bergstik® II Headers
1.0 OBJECTIVE
PAGE
REVISION
1 of 8
D
AUTHORIZED BY
S. Fierro
DATE
13 Mar. 06
CLASSIFICATION
UNRESTRICTED
This specification defines the performance, test, quality, and reliability requirements of Duplex Plated
Bergstik II Headers.
2.0 SCOPE
This specification is applicable to the termination characteristics of the Duplex Plated Bergstik II Headers.
When mated with FCI's Mini PV terminals or other 0.025" pin compatible receptacles on 0.100"
centerlines, this product provides board to board, board to cable, board to discrete wire and board to flex
interconnect capabilities in vertical one, two or three row configurations and right angle one and two row
configurations. This product can be Lead Free and meets the requirements of the European Union Directive
of Restrictions for Hazardous Substances (Directive 2002/95/EC)
3.0 GENERAL
This document is composed of the following sections:
Paragraph
1.0
2.0
3.0
4.0
5.0
5.1
5.2
5.3
5.4
6.0
7.0
8.0
9.0
9.1
9.2
9.3
9.4
9.5
9.6
CHART I
TABLE I
Title
Objective
Scope
General
Applicable Documents
Requirements
Qualification
Material
Finish
Design and Construction
Electrical Characteristics
Mechanical Characteristics
Environmental Conditions
Quality Assurance Provisions
Equipment Calibration
Inspection Conditions
Sample Quantity and Description
Acceptance
Qualification Testing
Requalification Testing
IR Reflow Profile
Qualification Testing Matrix
Copyright FCI
Form E-3334
Rev E
PDM: Rev:D
STATUS:Released
GS-01-001
Printed: Jan 04, 2007.