S14020G Datasheet, PDF (1/2 Pages) Faraday Technology – GENERAL PURPOSE LP FILTER

S14 SERIES
GENERAL PURPOSE LP FILTER
STEEPNESS FACTOR 1.40
This range of 7-pole Elliptical Function Low Pass Filters is intended for bandwidth limitation with minimal
distortion of the transmitted signal. The filters are corrected for Group Delay distortion over approx. 92% of
the passband and for loss distortion over the entire passband. Degradation of a composite video signal is
minimal when a 4.5 MHz or 5.5 MHz filter is selected for a 525 or 625 line T.V. system. The filters may be
used for antialiasing in A-D and D-A systems.
Order Code
S14020G
S14025G
S14030G
S14035G
S14040G
S14045G
S14050G
S14055G
S14060G
S14065G
S14070G
S14075G
S14080G
S14085G
S14090G
S14095G
S14100G
End of Passband
MHz
2.00
2.50
3.00
3.50
4.00
4.50
5.00
5.50
6.00
6.50
7.00
7.50
8.00
8.50
9.00
9.50
10.00
Start of Stopband
MHz
2.80
3.50
4.20
4.90
5.60
6.30
7.00
7.70
8.40
9.10
9.80
10.50
11.20
11.90
12.60
13.20
14.00
Group Delay Ripple
ns
40
30
25
25
20
20
15
15
15
12
12
10
10
10
10
10
10
Delay Time
ns
785
628
523
448
392
349
314
285
262
242
224
209
196
185
174
165
157
Other data
Impedance
75 ohms
Stopband attenuation wrt 100 kHz
> 40 dB
Insertion Loss at 100 kHz
< 1.3 dB
Amplitude ripple in passband
< 0.2 dB
Video performance for filters of 5.5 MHz (4.5 MHz for 525 line) and above.
Pulse and bar: K - rating
< 0.5%
Luminance/Chrominance Gain inequality (20T) < 3%
Luminance/Chrominance Delay inequality (20T < 10 ns
Aqueous Washable
Yes
Package
DR00014A
© Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice
FARA164d
Page 1 of 2
Dec-99(B)