PO-001 Datasheet, PDF (1/3 Pages) Faraday Technology – CONVERTER CARD

CONVERTER CARD PO-001
SERIAL DIGITAL TO 10 BIT VIDEO
The PO-001 converter card is a stand alone solution for single channel serial digital video to 10 bit
parallel video conversion Using the Gennum chipset the module provides EDH insertion for SMPTE
259M compliant signals. The module can successfully receive a serial digital signal from up to 300m
of cable. The PO-001 compliments the PI-001 10 bit parallel to SDI transmitter.
INPUT
I/P impedance
I/P return loss
SDI up to 540Mb/s
75 ohm
15dB min
OUTPUTS
Output signal
CCIR Rec. 656 10 bit parallel video
SUPPLY
Power:
Current:
5V
300mA max
EDH OPTION
Indications:
Controls:
EDH - Error detected Here
EDA - Error detected already
UES - Unknown Error status
TRS - Insert:
Bypass Mode:
(Note 1)
(Note 1)
(Note 1)
(Note 2)
(Note 2)
Note 1. These are accessible only through the serial interface SCL and SDA.
Note 2. These are available only through the I/O interface see connector for details.
CONNECTORS
Input
Output
75 ohm BNC socket
48 PIN Z-PAC 4 row x 12 on 2mm pitch
INDICATORS
Carrier Detected (Green) LED
© Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice
Fara229p
Page 1 of 3
Aug-05(B)