PI-001 Datasheet, PDF (1/3 Pages) Faraday Technology – PARALLEL TO SDI CONVERTER CARD WITH OPTIONAL EDH INSERTION

PARALLEL TO SDI CONVERTER CARD
WITH OPTIONAL EDH INSERTION
PI-001
INPUT
Parallel multiplexed component signals to CCIR Rec 656.
Note. To ease interfacing into equipment data is latched by the rising edge of the clock.
Data Set up time
3 ns min to positive edge of clock
Data hold time
2.5 ns min from positive edge of clock
OUTPUT
No of Outputs:
Output Impedance:
Output return loss:
Serial digital 143,177, 270 & 360Mb/s NRZI
3 off serial
75 Ohms.
>15dB 5 MHz to 270 MHz.
EDH OPTION
Indications:
Controls:
EDH - Error detected Here
EDA - Error detected already
UES - Unknown Error status
Transmit/Receive Mode:
Bypass Mode:
(Note 1.)
(Note 1.)
(Note 1.)
(Note 2.)
(Note 2.)
Note 1. These are accessible only through the serial interface SCL and SDA.
Note 2. These are available only through the I/O interface see connector for details.
Mechanical Details
The following formats are available:
Format A
STD configuration with low profile pins and BNC connectors for outputs.
Format B
LOW profile pins and MCX connectors for outputs.
Format C
STAND-OFF configuration with BNC outputs.
© Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice
Fara107p
Page 1 of 3
Aug-05(E)