GFG1350F Datasheet, PDF (1/2 Pages) Faraday Technology – ANTIALIASING FILTERS

GFG SERIES
ANTIALIASING FILTERS
These very small, low cost, filters are intended for use with A-D and D-A video converters where
some deviation from full multicodec standards is allowed. The cut off rate is slower than
recommended to reduce time domain ringing.
The filters are designed for use in systems adhering to the EBU standard for 4:2:2 A-D and D-A
conversion i.e. sampling rates of 13.5 MHz for the luminance (Y) channel and 6.75 MHz for the
chrominance (U and V) channels. The pre-filters have a flat passband and the post-filters are shaped
to provide sinx/x correction. Filters suitable for different sampling rates or with various losses at the
half sampling frequency can be supplied.
Type Number
LUMA
GFG1350F GFG1350S
CHROMA
GFG0675F GFG0675S
Filter Shape
Passband Shape
Sampling Frequency
Insertion Loss at 100 kHz
End Of Passband
Passband Amplitude Ripple
Loss at half S.F.
Start Of Stopband
Stopband Attenuation
Delay Time at 200 kHz
Pulse and bar: K - rating
Impedance
Temperature Range
Aqueous Washable
Package Type
Lowpass
Flat
13.5 MHz
< 1.5 dB
5.2 MHz
0.1 dB max
12 dB + 2 dB
8.6 MHz
40 dB min
200 ns + 5 ns
1%
75 ohms
0°C to 70°C
Yes
DR00008B
Lowpass
Sinx/x
13.5 MHz
< 4.5 dB
5.2 MHz
0.1 dB max
12 dB + 2 dB
8.6 MHz
40 dB min
230 ns + 5 ns
1%
75 ohms
0°C to 70°C
Yes
DR00008B
Lowpass
Flat
6.75 MHz
< 1.5 dB
2.2 MHz
0.1 dB max
12 dB + 2 dB
4.4 MHz
40 dB min
430 ns + 5 ns
4%
75 ohms
0°C to 70°C
Yes
DR00226A
Lowpass
Sinx/x
6.75 MHz
< 2.5 dB
2.2 MHz
0.1 dB max
12 dB + 2 dB
4.4 MHz
40 dB min
435 ns + 5 ns
4%
75 ohms
0°C to 70°C
Yes
DR00008B
© Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice
FARA174d
Page 1 of 2
Dec-99(A)