FHS1350F Datasheet, PDF (1/2 Pages) Faraday Technology – PRE A-D ANTI-ALIASING FILTER

FHS1350F
PRE A-D ANTI-ALIASING FILTER
The FHS1350F is a low cost solution for pre A-to-D anti-aliasing filtering of luminance, composite
or Y/C signals. Interfacing to the system is simplified with high input and low output impedance op-
amp buffer stages.
Filter Shape
Passband Shape
Gain
End Of Passband
Passband Amplitude Ripple wrt 100 kHz
Loss at 8.0 MHz wrt 5.5 MHz
Start Of Stopband
Stopband Attenuation wrt 5.5 MHz
Group Delay Ripple wrt 200 kHz
Delay Time at 200 kHz
Supply Voltage
Typical Current
Input Impedance
Aqueous Washable
Package
Lowpass
Flat
- 0.2 dB + 0.2 dB
+5.8 dB + 0.2 dB
with pin 6 open
with pin 6 gnd
5.5 MHz
+ 0.2 dB max
30 dB + 2 dB
9.0 MHz
40 dB min to 50 MHz
+ 25 ns max to 5.5 MHz
314 ns + 10 ns
+ 5v to + 8v
25 mA per rail at + 5v
10 MΩ typical
Yes
DR00032A
© Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice
FARA156d
Page 1 of 2
Dec-99(A)