FF0300P Datasheet, PDF (1/2 Pages) Faraday Technology – LOW PASS VIDEO FILTER

FF….P SERIES
LOW PASS VIDEO FILTER
STEEPNESS FACTOR 1.14
These low pass video filters are intended for bandwidth limitation over the video range of frequencies where it is
required to attenuate frequencies close to the edge of the passband. The filters are 9-pole Elliptical Function networks
which have been equalised to correct for group delay distortion over 80% of the passband and for loss distortion over
the entire passband. Degradation of a composite video signal is minimal when a 4.5 MHz or 5.5 MHz filter is selected
for a 525 or 625 line T.V. system. Typical uses are to suppress sound or telephone channels placed above and close to
the video band.
Order Code
FF0300P*
FF0350P*
FF0400P*
FF0450P*
FF0500P*
FF0550P*
FF0600P*
FF0650P*
FF0700P*
FF0750P*
FF0800P*
FF0850P*
FF0900P*
FF0950P*
FF1000P*
End of Passband
MHz
3.00
3.50
4.00
4.50
5.00
5.50
6.00
6.50
7.00
7.50
8.00
8.50
9.00
9.50
10.00
Start of Stopband
MHz
3.42
3.99
4.56
5.13
5.70
6.27
6.84
7.41
7.98
8.55
9.12
9.69
10.26
10.83
11.40
Group Delay Ripple
ns
25
20
20
17
17
17
15
15
15
10
10
10
10
10
10
Delay Time
ns
1063
910
798
710
638
580
530
490
455
425
400
375
355
335
320
* insert suffix ‘D’ for DIP package eg FF0500PD
suffix ‘B’ for BNC package eg FF0500PB
DR00020B
DR00029A
Other data
Impedance
75 ohms
Insertion Loss
< 2.0 dB
Stopband attenuation wrt 100 kHz
> 45 dB
Amplitude ripple in passband
< 0.2 dB
Video performance for filters of 5.5 MHz (4.5 MHz for 525 line) and above.
Pulse and bar: K - rating
< 1.0 %
Luminance/Chrominance Gain inequality (20T)
< 1.5 %
Luminance/Chrominance Delay inequality
< 5 ns
Aqueous Washable
No
© Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice
FARA168d
Page 1 of 2
Dec-99(A)