FF0200L Datasheet, PDF (1/2 Pages) Faraday Technology – LOW PASS VIDEO FILTER

FF….L SERIES
LOW PASS VIDEO FILTER
STEEPNESS FACTOR 1.35
These low pass video filters are intended for bandwidth limitation over the video range of frequencies. The filters are
7-pole Elliptical Function networks which have been equalised to correct for group delay distortion over 95% of the
passband and for loss distortion over the entire passband. Degradation of a composite video signal is minimal when a
4.5 MHz or 5.5 MHz filter is selected for a 525 or 625 line T.V. system. Typical uses are to suppress sound or
telephone channels placed above and close to the video band. The standard filters are specified. We would be pleased
to examine special requirements.
Order Code
FF0200L*
FF0250L*
FF0300L*
FF0350L*
FF0400L*
FF0450L*
FF0500L*
FF0550L*
FF0600L*
FF0650L*
FF0700L*
FF0750L*
FF0800L*
FF0850L*
FF0900L*
FF0950L*
FF1000L*
End of Passband
MHz
2.00
2.50
3.00
3.50
4.00
4.50
5.00
5.50
6.00
6.50
7.00
7.50
8.00
8.50
9.00
9.50
10.00
Start of Stopband
MHz
2.69
3.37
4.04
4.71
5.38
6.06
6.73
7.40
8.08
8.75
9.42
10.10
10.77
11.44
12.13
12.79
13.46
Delay Time
ns
1274
1019
850
728
637
566
510
463
425
392
364
340
319
300
383
268
255
* insert suffix ‘D’ for DIP package eg FF0500LD
suffix ‘B’ for BNC package eg FF0500LB
DR00020B
DR00029A
Other data
Impedance
75 ohms
Insertion Loss
< 1.5 dB
Stopband attenuation wrt 100 kHz
> 45 dB
Amplitude ripple in passband
< 0.2 dB
Video performance for filters of 5.0 MHz (4.5 MHz for 525 line) and above.
Pulse and bar: K - rating
< 0.5 %
Luminance/Chrominance Gain inequality (20T)
< 1.5 %
Luminance/Chrominance Delay inequality
< 5 ns
Aqueous Washable
No
Package
DR00020B
© Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice
FARA170d
Page 1 of 2
Dec-99(A)