FNA23060 Datasheet, PDF (9/15 Pages) Fairchild Semiconductor – 600 V Motion SPMr 2 Series

Recommended Operating Conditions
Symbol
Parameter
Conditions
V_PN Supply Voltage
V_CC Control Supply Voltage
V_BS High-Side Bias Voltage
dV_CC / dt,
dV_BS / dt
t_dead
Control Supply Variation
Blanking Time for
Preventing Arm - Short
Applied between P - N_U, N_V, N_W
Applied between V_{CC(UH, VH, WH)} - COM_(H), V_CC(L) -
COM_(L)
Applied between V_B(U) - V_S(U), V_B(V) - V_S(V), V_B(W) -
V_S(W)
For Each Input Signal
f_PWM
V_SEN
PWM Input Signal
Voltage for Current
Sensing
-40C T_C 125°C, -40C T_J 150°C
Applied between N_U, N_V, N_W - COM_{(H, L)}
(Including Surge Voltage)
PW_IN(ON) Minimun Input Pulse
PW_IN(OFF) ^Width
T_J
Junction Temperature
V_CC = V_BS = 15 V, I_C  60 A, Wiring Inductance
between N_{U, V, W} and DC Link N < 10nH (Note 10)
Note:
10. This product might not make right output response if input pulse width is less than the recommanded value.
Min.
-
14.5
13.5
-1
1.5
-
-5
2.0
2.0
-40
Value
Typ.
300
15.0
15.0
-
-
-
-
-
-
Max.
400
16.5
18.5
1
-
20
5
-
-
150
Unit
V
V
V
V / s
s
kHz
V
s
C
Figure 8. Allowable Maximum Output Current
Note:
11. This allowable output current value is the reference data for the safe operation of this product. This may be different from the actual application and operating condition.
©2015 Fairchild Semiconductor Corporation
9
FNA23060 Rev. 1.0
www.fairchildsemi.com