TMC1103 Datasheet, PDF (6/16 Pages) Fairchild Semiconductor – Triple Video A/D Converter with Clamps 8-Bit, 50Msps

TMC1103
Equivalent Circuits and Threshold Levels (continued)
V_DDA
V_RT
PRODUCT SPECIFICATION
t_ENA
V_IN
OE
t_{DIS 0.5V}
Three-State
Outputs
2.0V
0.8V
A_GND
29030
V_RB
Figure 4. Equivalent Analog Input Circuit
0.5V
High Impedance
7048B
Figure 5. Threshold Levels for Three-State Measurements
Absolute Maximum Ratings (beyond which the device may be damaged)¹
Parameter
Power Supply Voltages
VDDA
VDD
VDDA
AGND
Digital Inputs
Applied Voltage
Forced current
Analog Inputs
Applied Voltage
Forced current
Digital Outputs
Applied voltage
Forced current
Short circuit duration
Temperature
Operating, ambient
Junction
Lead, soldering
Vapor Phase soldering
Storage
Electrostatic Discharge
Condition
Measured to AGND
Measured to DGND
Measured to VDD
Measured to DGND
Measured to DGND
Measured to AGND
Measured to DGND
Single output in HIGH state to ground)
10 seconds
1 minute
EIAJ test method
Min
Typ
Max Unit
-0.5
+7.0
V
-0.5
+7.0
V
-0.5
+0.5
V
-0.5
+0.5
V
-0.5
-10.0
VDD + 0.5 V
+10.0 mA
-0.5
-10.0
VDDA+0.5 V
+10.0 mA
-0.5
VDD + 0.5 V
-6.0
+6.0
mA
1 second
-20
110
°C
+150
°C
+300
°C
+220
°C
-65
+150
°C
±150
V
Notes:
1. Absolute maximum ratings are limiting values applied individually while all other parameters are within specified operating
conditions. Functional operation under any of these conditions is NOT implied. Performance and reliability are guaranteed
only if Operating Conditions are not exceeded.
2. Applied voltage must be current limited to specified range.
3. Forcing voltage must be limited to specified range.
4. Current is specified as conventional current flowing into the device.
6