FSB117H Datasheet, PDF (5/18 Pages) Fairchild Semiconductor – mWSaver™ Fairchild Power Switch (FPS™)

Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol
Parameter
Min.
Max.
Unit
V_DRAIN Drain Pin Voltage^(5,6)
I_DM
Drain Current Pulsed⁽⁷⁾
FSB117H
FSB127H
FSB147H⁽⁹⁾
700
V
4.0
8.0
A
9.6
FSB117H
E_AS
Single Pulsed Avalanche Energy⁽⁸⁾ FSB127H
FSB147H
50
140
mJ
120
V_DD DC Supply Voltage
V_FB FB Pin Input Voltage
V_IPK IPK Pin Input Voltage
V_HV HV Pin Input Voltage
P_D
Power Dissipation (T_A＜50°C)
30
V
-0.3
7.0
V
-0.3
7.0
V
700
V
1.5
W
T_J
Operating Junction Temperature
-40
Internally
Limited⁽¹⁰⁾
°C
T_STG Storage Temperature Range
-55
+150
°C
T_L
Lead Soldering Temperature (Wave Soldering or IR, 10 Seconds)
Electrostatic Discharge Capability,
Human Body Model:
JESD22-A114
5.50
All Pins Except HV Pin
Charged Device Model:
JESD22-C101
2.00
ESD
Electrostatic Discharge Capability,
Human Body Model:
JESD22-A114
3.00
All Pins Including HV Pin
Charged Device Model:
JESD22-C101
1.25
+260
°C
kV
Notes:
5. All voltage values, except differential voltages, are given with respect to the network ground terminal.
6. Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device.
7. Non-repetitive rating: pulse width is limited by maximum junction temperature.
8. L=51mH, starting T_J=25°C.
9. L=14mH, starting T_J=25°C.
10. Internally limited by Over-Temperature Protection (OTP). Refer to T_OTP.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol
Parameter
R_HV Resistor Connect to HV Pin for Full Range Input Detection
Thermal Resistance Table
Symbol
Parameter
θ_JA
Junction-to-Air Thermal Resistance
ψ_JT
Junction-to-Package Thermal Resistance⁽¹¹⁾
Note:
11. Measured on the package top surface.
© 2011 Fairchild Semiconductor Corporation
FSB117H / FSB127H / FSB147H • Rev. 1.0.5
5
Min.
150
Max.
250
Unit
kΩ
Typ.
86
20
Unit
°C/W
°C/W
www.fairchildsemi.com