English
Language : 

FOD8321 Datasheet, PDF (5/19 Pages) Fairchild Semiconductor – 2.5A Output Current, Gate Drive Optocoupler in Optoplanar ® Wide Body SOP 5-Pin
Isolation Characteristics
Apply over all recommended conditions, typical value is measured at TA = 25ºC
Symbol
Parameter
Conditions
Min. Typ. Max. Units
VISO
RISO
CISO
Input-Output Isolation
Voltage
Isolation Resistance
Isolation Capacitance
TA = 25ºC, R.H. < 50%, t = 1.0min,
II-O ≤ 20µA, 50Hz(5)(6)
VI-O = 500V(5)
VI-O = 0V, Freq = 1.0MHz(6)
5,000
1011
1
VRMS
Ω
pF
Notes:
5. Device is considered a two terminal device: Pins 1 and 3 are shorted together and Pins 4, 5 and 6 are shorted
together.
6. 5,000 VACRMS for 1 minute duration is equivalent to 6,000 VACRMS for 1 second duration.
Electrical Characteristics
Apply over all recommended conditions, typical value is measured at VDD = 30V, VSS = Ground, TA = 25°C unless
otherwise specified.
Symbol
Parameter
Conditions
Min.
Typ.
Max. Units Figure
VF
Δ(VF / TA)
BVR
CIN
IOH
IOL
VOH
VOL
IDDH
IDDL
IFLH
VFHL
VUVLO+
VUVLO-
UVLOHYS
Input Forward Voltage
IF = 10mA
Temperature Coefficient of
Forward Voltage
Input Reverse Breakdown IR = 10µA
Voltage
Input Capacitance
f = 1MHz, VF = 0V
High Level Output
Current(1)
VOH = VDD – 3V
VOH = VDD – 6V
Low Level Output
Current(1)
VOL = VSS + 3V
VOL = VSS+ 6V
High Level Output
Voltage(7)(8)
IF = 10mA, IO = -2.5A
IF = 10mA, IO = -100mA
Low Level Output
Voltage(7)(8)
IF = 10mA, IO = 2.5A
IF = 0mA, IO = 100mA
High Level Supply Current VO Open, IF = 10 to 16mA
Low Level Supply Current VO Open, VF = 0 to 0.8V
Threshold Input Current
Low to High
IO = 0mA, VO > 5V
Threshold Input Voltage
High to Low
IO = 0mA, VO < 5V
UnderVoltage Lockout
Threshold
UnderVoltage Lockout
Threshold Hysteresis
IF = 10mA, VO > 5V
IF = 10mA, VO < 5V
1.1
1.5
1.8
-1.8
5
60
1.0
2.0
2.5
2.0
2.5
1.0
2.0
2.5
2.0
2.5
VDD – 6.25
VDD – 0.5
VDD – 2.5
VDD – 0.1
VSS + 2.5
VSS + 0.1
2.9
VSS + 6.25
VSS + 0.5
5
2.8
5
2.4
7.5
0.8
11.5
12.7
14.5
10.0
11.2
13.0
1.5
V
mV/°C
V
pF
A
A
A
A
V
V
V
V
mA
mA
mA
V
V
V
V
16
1, 3
1, 3, 19
4, 6
4, 6, 18
1
1, 2, 20
4
5, 21
7, 8, 22
7, 8, 23
9, 15, 24
25
17, 26
17, 26
Notes:
7. In this test, VOH is measured with a dc load current of 100mA. When driving capacitive load VOH will approach VDD
as IOH approaches zero amps.
8. Maximum pulse width = 1ms, maximum duty cycle = 20%.
©2010 Fairchild Semiconductor Corporation
FOD8321 Rev. 1.0.4
5
www.fairchildsemi.com