FMS6364A Datasheet, PDF (4/12 Pages) Fairchild Semiconductor – Low-Cost Four-Channel Standard Definition (SD) & High (HD) Definition Video Filter Driver

DC Electrical Characteristics
Unless otherwise noted, TA=25°C, VCC=3.3V, RS=37.5Ω, all inputs are AC coupled with 0.1µF, and all output
AC coupled with 220µF into 150Ω load.
Symbol
Parameter
Supply
VS
Supply Voltage Range
ICC
Quiescent Supply Current⁽¹⁾
Vin
Video Input Voltage Range
PSRR Power Supply Rejection Ratio
Note:
1. 100% tested at TA=25°C.
Conditions
VS Range
VS=+3.3V, No Load, EN=LOW
VS=+5.25V, No Load, EN=LOW
Referenced to GND if DC Coupled
DC (All Channels)
Min.
3.135
Typ.
3.30
50
55
1.4
-50
Max. Units
5.25
V
65
mA
76
mA
Vpp
dB
Standard-Definition Electrical Characteristics
Unless otherwise noted, TA=25°C, VIN=1VPP, VCC=5V, RSOURCE=37.5Ω, all inputs AC coupled with 0.1µF, all outputs
AC coupled with 220µF into 150Ω loads, and referenced to 400kHz.
Symbol
AVSD
f01dBSD
f1dBSD
fcSD
fSBSD
DG
Parameter
Channel Gain⁽²⁾
-0.1dB Flatness
-1dB Flatness⁽²⁾
-3dB Bandwidth⁽²⁾
Attenuation (Stopband Reject)⁽²⁾
Differential Gain
DP
THD
Differential Phase
Total Harmonic Distortion, Output
XTALKSD Crosstalk (Channel-to-Channel)
SNR Signal-to-Noise Ratio⁽³⁾
tpdSD Propagation Delay
CLGSD Chroma Luma Gain⁽²⁾
CLDSD Chroma Luma Delay
tON
Enable Time
tOFF Disable Time
Notes:
2. 100% tested at TA=25°C.
3. SNR=20 • log (714mV / rms noise).
Conditions
All SD Channels
All SD Channels
All SD Channels
All SD Channels
All SD Channels at f=27MHz
All SD Channels
All SD Channels
VOUT=1.4VPP, 3.58MHz
1MHz
NTC-7 weighting, 100kHz to
4.2MHz
Delay from input to output,
4.5MHz
f=3.58MHz (ref to SDIN at
400kHz)
f=3.58MHz (ref to SDIN at
400kHz)
Min.
5.8
7
8
45
95
Typ.
6.0
5
8
9
60
0.3
0.6
0.35
-74
76
90
100
5.5
1
1
Max.
6.2
Units
dB
MHz
MHz
MHz
dB
%
°
%
dB
dB
ns
105
%
ns
µs
µs
© 2010 Fairchild Semiconductor Corporation
FMS6364A • Rev. 3.0.1
4
www.fairchildsemi.com