MOC3052M Datasheet, PDF (3/11 Pages) Fairchild Semiconductor – 6-PIN DIP RANDOM-PHASE OPTOISOLATORS TRIAC DRIVERS (600 VOLT PEAK)

MOC3051-M
6-PIN DIP RANDOM-PHASE
OPTOISOLATORS TRIAC DRIVERS
(600 VOLT PEAK)
MOC3052-M
ELECTRICAL CHARACTERISTICS (T_A = 25°C Unless otherwise specified)
INDIVIDUAL COMPONENT CHARACTERISTICS
Parameters
EMITTER
Input Forward Voltage
Reverse Leakage Current
DETECTOR
Peak Blocking Current, Either Direction
Peak On-State Voltage, Either Direction
Critical Rate of Rise of Off-State Voltage
Test Conditions
I_F = 10 mA
V_R = 3 V
V_DRM, I_F = 0 (note 1)
I_TM = 100 mA peak, I_F = 0
I_F = 0 (figure 7, @400V)
Symbol Device Min Typ* Max Units
V_F
I_R
I_DRM
V_TM
dv/dt
All
1.15 1.5
V
All
0.05 100 µA
All
10 100 nA
All
1.7 2.5
V
All 1000
V/µs
TRANSFER CHARACTERISTICS (T_A = 25°C Unless otherwise specified.)
DC Characteristics
Test Conditions Symbol Device
Min
LED Trigger Current,
either direction
Holding Current, Either Direction
Main terminal
Voltage = 3V (note 2)
MOC3051-M
I_FT
MOC3052-M
I_H
All
Typ*
280
Max Units
15
mA
10
µA
*Typical values at T_A = 25°C
Note
1. Test voltage must be applied within dv/dt rating.
2. All devices are guaranteed to trigger at an I_F value less than or equal to max I_FT. Therefore, recommended operating I_F lies
between max 15 mA for MOC3051, 10 mA for MOC3052 and absolute max I_F (60 mA).
3. Isolation surge votlage, VISO, is an internal device breakdown rating. For this text, pins 1 and 2 are common, and pins 4, 5 and
6 are common.
© 2004 Fairchild Semiconductor Corporation
Page 3 of 11
9/2/04