 English |
|
|
|
|
|
|
|
| MOC3031M Datasheet, PDF (3/11 Pages) Fairchild Semiconductor – 6-PIN DIP ZERO-CROSS OPTOISOLATORS TRIAC DRIVER OUTPUT (250/400 VOLT PEAK) | |||
| |||
| ◁ |
Zero Crossing Characteristics (TA = 25°C Unless otherwise speciï¬ed.)
Characteristics
Test Conditions
Symbol Device
Inhibit Voltage
IF = rated IFT, MT1-MT2 voltage
VIH
All
above which device will not trigger
off-state
Leakage in Inhibited State IF = rated IF , rated VDRM, off-state
I DRM2
All
Min
Typ
Max
20
500
Units
V
µA
Note
1. Test voltage must be applied within dv/dt rating.
2. All devices are guaranteed to trigger at an IF value less than or equal to max IFT. Therefore, recommended operating IF lies between max IFT
(15 mA for MOC3031M & MOC3041M, 10 mA for MOC3032M & MOC3042M, 5 mA for MOC3033M & MOC3043M) and absolute max IF (60 mA).
3. This is static dv/dt. See Figure 9 for test circuit. Commutating dv/dt is a function of the load-driving thyristor(s) only.
3
MOC3031M, MOC3032M, MOC3033M, MOC3041M, MOC3042M, MOC3043M Rev. 1.0.1
www.fairchildsemi.com
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese