H11L1M Datasheet, PDF (3/9 Pages) Fairchild Semiconductor – 6-PIN DIP OPTOISOLATORS LOGIC OUTPUT

6-PIN DIP
OPTOISOLATORS LOGIC OUTPUT
H11L1M
H11L2M
H11L3M
ISOLATION CHARACTERISTICS
Parameters
Test Conditions
Symbol
Min
Typ
Max
Units
Input-Output Isolation Voltage
Isolation Capacitance
Isolation Resistance
t =1 sec.
V_I-O = 0V, f = 1 MHz
V_I-O = ±500 VDC
V_ISO
7500
C_ISO
0.4
R_ISO
10¹¹
V_PEAK
0.6
pF
Ω
TRANSFER CHARACTERISTICS
DC Characteristics
Supply Current
Output Voltage, low
Turn-On Threshold Current
Turn-Off Threshold Current
Hysteresis Ratio
AC Characteristics
SWITCHING SPEED
Turn-On time
Test Conditions
Symbol Device
I_F = 10mA, V_CC = 5V
R_L=270Ω,V_CC=5V, I_F=I_F(on) max.
I_CC(on)
V_OL
R_L=270Ω, V_CC = 5V
I_F(on)*
R_L=270Ω, V_CC = 5V
R_L=270Ω, V_CC = 5V
I_F(off)
I_F(off)/I_F(on)
All
All
H11L1M
H11L2M
H11L3M
All
All
Test Conditions
Symbol Device
Min
0.3
0.50
Min
R_L=270Ω, V_CC = 5V, I_F=I_F(on),
T_A=25°C
t_on
All
Fall Time
R_L=270Ω, V_CC = 5V, I_F=I_F(on),
T_A=25°C
t_f
All
Turn-Off Time
R_L=270Ω, V_CC = 5V, I_F=I_F(on),
T_A=25°C
t_off
All
Rise time
Data Rate
R_L=270Ω, V_CC = 5V, I_F=I_F(on),
T_A=25°C
t_r
All
All
Typ
1.6
0.2
1.0
0.75
Typ
1.0
0.65
0.1
.05
0.1
2.0
1.2
0.1
0.07
0.1
1.0
Max Units
5.0 mA
0.4
V
1.6
10.0 mA
5.0
mA
0.90
Max Units
µs
4
µs
µs
4
µs
MHz
NOTE:
*Maximum I_F(ON) is the maximum current required to trigger the output. For example, a 1.6mA maximum trigger current would
require the LED to be driven at a current greater than 1.6mA to guarantee the device will turn on. A 10% guard band is recom-
mended to account for degradation of the LED over its lifetime. The maximum allowable LED drive current is 60mA.
© 2003 Fairchild Semiconductor Corporation
Page 3 of 9
3/24/03