FSUSB42_12 Datasheet, PDF (3/10 Pages) Fairchild Semiconductor – Low-Power, Two-Port, Hi-Speed, USB2.0 (480Mbps) UART Switch

Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol
Parameter
Min.
Max.
Unit
V_CC
V_CNTRL
V_SW
I_IK
I_OUT
T_STG
MSL
Supply Voltage
DC Input Voltage (S, /OE)⁽¹⁾
DC Switch I/O Voltage⁽¹⁾
DC Input Diode Current
DC Output Current
Storage Temperature
Moisture Sensitivity Level (JEDEC J-STD-020A)
-0.5
-0.5
-0.50
-50
-65
5.6
V_CC
5.25
100
+150
1
V
V
V
mA
mA
°C
Level
All Pins
7
I/O to GND
8
Human Body Model, JEDEC: JESD22-A114
Power to GND
16
ESD
D+/D-
9
kV
IEC 61000-4-2 System on USB Connector ^{Air Discharge}
15
Pins D+ & D-
Contact
8
Charged Device Model, JEDEC: JESD22-C101
2
Note:
1. The input and output negative ratings may be exceeded if the input and output diode current ratings are observed.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol
Parameter
V_CC
V_CNTRL(2)
Supply Voltage
Control Input Voltage (S, /OE)
V_SW
Switch I/O Voltage
T_A
Operating Temperature
Note:
2. The control input must be held HIGH or LOW and it must not float.
Min.
3.0
0
-0.5
-40
Max.
4.4
V_CC
4.5
+85
Unit
V
V
V
°C
© 2007 Fairchild Semiconductor Corporation
FSUSB42 • Rev. 1.1.5
3
www.fairchildsemi.com