FAN5645 Datasheet, PDF (3/10 Pages) Fairchild Semiconductor – Indicator LED Blinker with Single-Wire Interface

Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device
reliability. The absolute maximum ratings are stress ratings only.
Symbol
TJ
TSTG
TL
ESD
Parameter
VIN, LED+, CTRL Voltage
ISET Voltage
Junction Temperature
Storage Temperature
Lead Soldering Temperature, 10 seconds
Electrostatic Discharge Protection Level
HBM
CDM
HBM (on LED+ pin)
Min.
-0.3
-0.3
-40
-65
7
2
8
Max.
+6.0
VIN+0.2
150
150
260
Unit
V
V
°C
°C
°C
kV
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to absolute maximum ratings.
Symbol
VIN
IOUT
RSET
TA
TJ
Parameter
Power Supply Voltage Range
Output Current
Resistor Used to Set LED Current
Operating Ambient Temperature Range
Operating Junction Temperature Range
Min.
2.7
1
24.7
-40
-40
Max.
5.5
20
494.0
+85
+125
Units
V
mA
kΩ
°C
°C
© 2006 Fairchild Semiconductor Corporation
FAN5645 • Rev. 1.0.0
3
www.fairchildsemi.com