74LCX162374_05 Datasheet, PDF (3/10 Pages) Fairchild Semiconductor – Low Voltage 16-Bit D-Type Flip-Flop with 5V Tolerant Inputs and Outputs and 26ohm Series Resistors

Functional Description
The LCX162374 consists of sixteen edge-triggered
flip-flops with individual D-type inputs and 3-STATE true
outputs. The device is byte controlled with each byte func-
tioning identically, but independent of the other. The control
pins can be shorted together to obtain full 16-bit operation.
Each byte has a buffered clock and buffered Output Enable
common to all flip-flops within that byte. The description
which follows applies to each byte. Each flip-flop will store
Logic Diagrams
the state of their individual D inputs that meet the setup and
hold time requirements on the LOW-to-HIGH Clock (CP_n)
transition. With the Output Enable (OE_n) LOW, the con-
tents of the flip-flops are available at the outputs. When
OE_n is HIGH, the outputs go to the high impedance state.
Operation of the OE_n input does not affect the state of the
flip-flops.
Byte 1 (0:7)
Byte 2 (8:15)
Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays.
3
www.fairchildsemi.com